Pressure sensors are often used in safety control systems. The main target area is the air compressor's own safety management system. There are many sensor applications in the field of safety control. As a very common sensor, pressure sensors are not surprisingly used in safety control systems. Applications in the field of safety control generally consider performance, cost considerations, and practical convenience and safety. It has proven to be very effective in selecting pressure sensors. The pressure sensor uses the processing technology of mechanical equipment to mount some components and devices such as signal conditioners on a small chip. Therefore, its small size is also one of its advantages. In addition, its cheap price is another of its advantages. To a certain extent, it can improve the accuracy of system testing. In the safety control system, the pressure brought by the compressor is controlled to a certain extent by installing a pressure sensor in the pipeline equipment of the air outlet, which is a certain protection measure and a very effective control system. When the compressor starts normally, if the pressure value does not reach the upper limit, the controller will open the air inlet and adjust to make the equipment reach the maximum power.

In the air conditioning combination, the three-point combination is filter + regulator + oiler. It is often used in high-pressure air used in cylinders to filter impurities and add lubricating oil to high-pressure gas to reduce the wear of the cylinder during movement. In the pneumatic transmission system, the pneumatic three-piece refers to the air filter, pressure reducing valve and oil mist device. The combination of the air filter and the pressure reducing valve can be called a pneumatic two-piece. The air filter and pressure reducing valve can also be assembled together to become a filter pressure reducing valve (the function is the same as that of the air filter and pressure reducing valve). In some cases, oil mist cannot be allowed in the compressed air. You need to use an oil mist separator to filter out the oil mist in the compressed air. In short, these several components can be selected as needed, and they can be used in combination. The pressure reducing valve can stabilize the gas source and keep the gas source in a constant state, which can reduce the damage to the hardware such as the valve or the actuator when the gas pressure changes suddenly. The filter is used for cleaning the air source, and can filter the water in the compressed air to prevent the water from entering the device with the gas. The oil mister can lubricate the moving parts of the body, and can lubricate the parts that are not convenient to lubricate, which greatly prolongs the service life of the body.
CHANTO / Changtuo model list is as follows:
Product name Model Product name Model Product name Model
Pressure Detector SE3 Series SE31-01-22-2M Pressure Detector SE3 Series SE32-01-22-2M Pressure Detector SE3 Series SE33-01-22-2M
Pressure detector SE3 series SE31-01-62-2M Pressure detector SE3 series SE32-01-62-2M Pressure detector SE3 series SE33-01-62-2M
Pressure detector SE3 series SE31-N1-22-2M Pressure detector SE3 series SE32-N1-22-2M Pressure detector SE3 series SE33-N1-22-2M
Pressure Detector SE3 Series SE31-N1-62-2M Pressure Detector SE3 Series SE32-N1-62-2M Pressure Detector SE3 Series SE33-N1-62-2M
Pressure Detector SE3 Series SE31-G1-22-2M Pressure Detector SE3 Series SE32-G1-22-2M Pressure Detector SE3 Series SE33-G1-22-2M
Pressure detector SE3 series SE31-G1-62-2M Pressure detector SE3 series SE32-G1-62-2M Pressure detector SE3 series SE33-G1-62-2M
Pressure detector SE3 series SE31-01-30-2M Pressure detector SE3 series SE32-01-30-2M Pressure detector SE3 series SE33-01-30-2M
Pressure Detector SE3 Series SE31-01-70-2M Pressure Detector SE3 Series SE32-01-70-2M Pressure Detector SE3 Series SE33-01-70-2M
Pressure detector SE3 series SE31-N1-30-2M Pressure detector SE3 series SE32-N1-30-2M Pressure detector SE3 series SE33-N1-30-2M
Pressure detector SE3 series SE31-N1-70-2M Pressure detector SE3 series SE32-N1-70-2M Pressure detector SE3 series SE33-N1-70-2M
Pressure detector SE3 series SE31-G1-30-2M Pressure detector SE3 series SE32-G1-30-2M Pressure detector SE3 series SE33-G1-30-2M
Pressure detector SE3 series SE31-G1-70-2M Pressure detector SE3 series SE32-G1-70-2M Pressure detector SE3 series SE33-G1-70-2M
Pressure detector SE3 series SE31-01-30-D Pressure detector SE3 series SE32-01-30-D Pressure detector SE3 series SE33-01-30-D
Pressure detector SE3 series SE31-01-70-D Pressure detector SE3 series SE32-01-70-D Pressure detector SE3 series SE33-01-70-D
Pressure detector SE3 series SE31-N1-30-D Pressure detector SE3 series SE32-N1-30-D Pressure detector SE3 series SE33-N1-30-D
Pressure detector SE3 series SE31-N1-70-D Pressure detector SE3 series SE32-N1-70-D Pressure detector SE3 series SE33-N1-70-D
Pressure detector SE3 series SE31-G1-30-D Pressure detector SE3 series SE32-G1-30-D Pressure detector SE3 series SE33-G1-30-D
Pressure detector SE3 series SE31-G1-70-D Pressure detector SE3 series SE32-G1-70-D Pressure detector SE3 series SE33-G1-70-D

Order process
Landline: 021-59718851 (AM-8: 30 to PM-17: 30)
Mobile phone: 18918462396 (WeChat same number 24-hour service)

QQ: 2030185432

Email: kunage@126.com
Receive customer purchase list, provide customers with valve model selection and quotation (price list).
Specific agreement: delivery time, special requirements, etc.
download Google:
Customers have special requirements for products, and must provide the following instructions in the order contract:
(1) Structure length;
(2) Connection form;
(3) Nominal diameter, full diameter, reduced diameter, pipe size;
(4) Operating medium, temperature and pressure range;
(5) Experiment, inspection standards and other requirements;
(6) Various driving devices can be configured in this field according to the special requirements of customers;
If the determined valve type and model are provided by the customer, the customer should correctly explain the meaning and requirements of its model, and sign the contract under the conditions that the supply and demand sides understand and agree.