Product Name: Imported Electric Ball Valve Product Model: Buhrer Series
Drive method: electric, pneumatic, hydraulic, manual Connection type: flange, wafer type, welding, thread, ferrule, etc.
Structural form: floating ball type, fixed ball type, straight-through seal structure: PTFE, PPL, hard seal
Pressure range: 1.0MPa-32MPa Nominal diameter: DN15-300
Common materials: WCB, 304, 304L, 316, 316L, chromium molybdenum steel, titanium alloy steel, etc.
Product introduction
The imported electric ball valve produced by Breer can be driven by electric, pneumatic, hydraulic, manual, and flange, wafer, welding, thread, ferrule, etc., and the floating ball type and fixed ball can be used as the structure. Type, straight-through, sealing structure can choose PTFE, PPL, hard seal, pressure range PN1.0MPa-32MPa, nominal diameter is DN15-300mm, material can choose WCB, 304, 304L, 316, 316L, chromium molybdenum steel, titanium Alloy steel, etc. Because the valve is used in a very wide range, the same valve has different combinations in different situations and working conditions.
Product Details
The imported electric ball valve is integrated with electric actuators. It is mainly used for two-position cutting and adjustment. The valve and the actuator are connected in a direct connection manner. The electric actuator has a built-in servo system. It does not need to be equipped with a servo amplifier. It can control the operation by inputting 4-20mA signal and 220VAC power. It has the advantages of simple connection, compact structure, small size, light weight, small resistance, stable and reliable movement, etc.
The imported electric ball valve adopts a central structure. During the closing process, the specific pressure of the seal between the valve seat and the ball can quickly increase, thereby ensuring the reliable sealing of the sealing pair. When the valve is opened, the valve seat and the ball can be quickly disengaged, effectively reducing the operating torque, and minimizing the possibility of injury between the valve seat surface and the spherical surface.
Overview of imported electric ball valve:
Imported electric ball valves and forged casting materials can ensure sufficient hardness and strength without the inherent defects at the maximum rated operating pressure. A sufficient amount of wall thickness determines the body and adapts to different high-strength bolt valve systems for easy maintenance and careful design of valve trims sufficient to bear pressure pipeline valves, choosing a variety of working reliability working conditions.
a: Fire safety structure: When the trunnion ball valve is used normally, it is covered with seat and spherical surface, seat holder o-ring and stamped body. This is a soft seal, and the seal is reliable when the seat and o-ring are injured. The valve seat holder and body will be covered with expanded graphite for the purpose of fire safety.
b: Anti-static equipment: In order to prevent the friction between the ball, the rod and Teflon can generate static electricity, which may ignite flammable materials and cause accidents. In this ball valve, the static conductive spring, the valve rod and ball, the valve rod and the body are therefore Static electricity is a guarantee of ground and system safety.
c. Free leaking body sealing structure: smooth, open and close positions of the valve, double capped gaskets and o-rings of the valve body and bonnet, on the basis of this, such reasons as fire, high temperature, shock absorption and unevenness Neither opening nor closing torque will cause external leakage.
d. Low torque operation: Self-lubricating bearings are mounted on frictional stem cells, resulting in wear resistance, flexible operation and low torque.
e. Double block exudation: When the ball is fully open or closed, the transmitter's material body can announce the drainage and emptying device in the center of the cavity. In addition, the center pressure valve cavity can be released to a low pressure to end its own rescue seat.
f. Emergency sealing compound injection hole design and compound injection valve installed on the stem / wearing hat and body support valve. When the seal stem or seat is damaged to induce leakage, this compound can be used for second seal concealment. The non-return valve is installed next to the compound injection valve to prevent the compound from the compound compound on the top of the transmitter compound to connect the connector injection gun quickly due to the effect of outflowing compounds.
g. Expansion valve stem: The valve is installed underground. The valve stem can be extended. For the convenience of operation, the corresponding composite injector and drain valve can be extended to the highest valve.
h. Automatic body cavity, rescue: When the body pressure rises abnormally, such as unstable factors, normal pressure will be placed on the valve seat downstream of the trunnion ball valve, and the abnormal automatic release of pressure will not damage the sealed upstream seat.

Order process
Landline: 021-59718851 (AM-8: 30 to PM-17: 30)
Mobile phone: 18918462396 (WeChat same number 24-hour service)

QQ: 2030185432

Email: kunage@126.com
Receive customer purchase list, provide customers with valve model selection and quotation (price list).
Specific agreement: delivery time, special requirements, etc.
download Google:
Customers have special requirements for products, and must provide the following instructions in the order contract:
(1) Structure length;
(2) Connection form;
(3) Nominal diameter, full diameter, reduced diameter, pipe size;
(4) Operating medium, temperature and pressure range;
(5) Experiment, inspection standards and other requirements;
(6) Various driving devices can be configured in this field according to the special requirements of customers;
If the determined valve type and model are provided by the customer, the customer should correctly explain the meaning and requirements of its model, and sign the contract under the conditions that the supply and demand sides understand and agree.