Product Name: Imported Pilot Operated Solenoid Valve Product Model: Buhrer Series
Drive method: electromagnetic connection: flange, thread
Structure: Pilot type, Piston type Seal structure: Pilot type
Pressure range: 1.6-100MPa Nominal diameter: 1mm-500mm
Common materials: WCB, 304, 316, alloy steel, etc.
Product introduction
The imported pilot-operated solenoid valve produced by Breer can be driven by electromagnetic, flanged, threaded by connection, pilot-operated by piston, piston-type by sealed, and pilot-operated by sealed structure, pressure range PN1.6-100MPa, The nominal diameter is 1mm-500mmmm, and the material can be WCB, 304, 316, alloy steel, etc. Because the valve is used in a very wide range, the same valve has different combinations in different situations and working conditions.
Product Details
American Buhrer brand-imported pilot solenoid valve is widely used in aerospace, marine heavy industry, petrochemical, water supply and drainage, fire fighting equipment, food medical equipment, cleaning equipment, landscape sprinkler irrigation, humidification equipment, hydraulic equipment, testing equipment, water plants, etc. Pressure in the pipeline system of 1.6-100MPa.
Features of imported pilot operated solenoid valve:
Pilot structure, the valve core is stainless steel piston, the piston ring will not be stuck by impurities in the medium, high dynamic sealing performance, long life; no direct friction between the piston and the metal valve cavity, no restriction on the valve body installation direction; special coil , It is not easy to burn; stop and restart for a long time, the action is also sensitive; the leakage is zero; the service life is more than 1.5 million times.
A series of imported solenoid valves of the American Buhrer brand: direct-acting solenoid valves, stepped direct-acting solenoid valves, low-pressure solenoid valves, high-pressure solenoid valves, ultra-high-pressure solenoid valves, ultra-high temperature solenoid valves, steam solenoid valves, and low-temperature solenoid valves Anticorrosive solenoid valve, submersible solenoid valve, gas solenoid valve, gas fast shut-off solenoid valve, new gas safety solenoid valve, vacuum solenoid valve, pulse solenoid valve, self-protection solenoid valve, two-position three-way solenoid valve, with manual function Solenoid valve, solenoid valve with signal function, etc.
Main technical parameters of imported pilot solenoid valve:
Specifications: DN1DN500
Body material: brass, stainless steel, etc.
Applicable medium: gas, oil, steam, corrosive fluid, etc.
Temperature range: 0 ～ + 550 ℃
Protection performance: Moisture-proof, explosion-proof (Exd IICT4) (Exd IICT5)
Wiring method: terminal block type; lead type, plug type
Control method: normally open, normally closed
Power supply voltage: DC12V ～ 127V; AC36 ～ 380V
Connection method: internal thread, flange
Working principle of imported pilot solenoid valve:
Normally closed: When the coil is energized, the pilot valve core is closed, the pilot hole is opened, the upper cavity of the valve is depressurized, the piston is pushed by the pressure of the lower cavity medium, and the solenoid valve is opened.
When the coil is de-energized, the pilot valve core is reset by the spring, the pilot hole is closed, the upper cavity of the valve is pressurized by the piston throttle hole and the thrust of the return spring is closed, and the solenoid valve is closed.
Normally open: When the coil is energized, the pilot valve core is reset by the spring, the pilot hole is closed, the upper cavity of the valve is pressurized by the piston orifice, and the thrust of the return spring is closed, and the solenoid valve is closed.
When the coil is de-energized, the pilot valve core is reset by the spring, the pilot hole is opened, the upper cavity of the valve is depressurized, the piston is pushed by the pressure of the lower cavity medium, and the solenoid valve is opened.
Note: The pressure at the outlet end is greater than the pressure at the inlet end, and the medium will conduct back. Non-return valve can be installed

Order process
Landline: 021-59718851 (AM-8: 30 to PM-17: 30)
Mobile phone: 18918462396 (WeChat same number 24-hour service)

QQ: 2030185432

Email: kunage@126.com
Receive customer purchase list, provide customers with valve model selection and quotation (price list).
Specific agreement: delivery time, special requirements, etc.
download Google:
Customers have special requirements for products, and must provide the following instructions in the order contract:
(1) Structure length;
(2) Connection form;
(3) Nominal diameter, full diameter, reduced diameter, pipe size;
(4) Operating medium, temperature and pressure range;
(5) Experiment, inspection standards and other requirements;
(6) Various driving devices can be configured in this field according to the special requirements of customers;
If the determined valve type and model are provided by the customer, the customer should correctly explain the meaning and requirements of its model, and sign the contract under the conditions that the supply and demand sides understand and agree.