Product name: Imported diaphragm solenoid valve Product model:
Buhrer
Drive method: automatic Connection form: thread, flange
Structure: Diaphragm type, direct acting Seal structure: Soft seal
Pressure range: 1.6MPa Nominal dia
meter: DN6-200
Common material: brass
Product introduction
The imported diaphragm type solenoid valve produced by Breer can be driven by automatic mode, threaded or flanged by connection mode, diaphragm type or direct-acting by structure, soft seal by sealing structure, pressure range PN1.6MPa , The nominal dia
meter is DN6-200mm, and the material can be brass. Because the valve is used in a very wide range, the same valve has different combinations in different situations and working conditions.
Product Details
Principle of imported diaphragm solenoid valve: When power is applied, the electromagnetic
coil generates electromagnetic force to lift the closing member from the valve seat, and the valve opens; when the power is off, the electromagnetic force disappears, the spring presses the closing member on the valve seat, and the valve closes.
Applicable medium: water, gas, oil
Medium temperature: -5 ~ 80 ℃
Action method: pilot
Working pressure: normally closed: 0.3 ~ 16kgf / cm2;
Body Material: Brass (forged)
Diaphragm seal, diaphragm material: (HNBR) (NBR)
Coil protection level: IP65
Imported two-position two normally closed diaphragm solenoid valve-closed when power is off, open when powered on; the product is serialized production, small size, large flow, wide range of application , 50)
Ambient temperature: 0 ℃ ～ 65 ℃
Medium temperature: 0 ℃ ～ 120 ℃
Installation: According to the flow direction arrow marked on the valve, in order to enhance the service life and reliability, it is best to install the
coil upward and horizontally
Voltage: AC24V / 110V / 220V / 230V / 240V 50 / 60HZ DC24V / 12V ± 10% Allowable fluctuation 16 ～ 25mm optional NASS
coil
Seals: NBR, VITON, EPDM, etc. can be used to apply to the switching control of different fluids.
Professional manufacturing and professional services, KUNAG creates more value for you
Continuously improving the quality of services and keeping improving, "sincere service" is the eternal theme of KUNAG. Kunag strictly complies with the requirements of ISO9001-2000 quality system certification, strictly controls the quality and responsibilities to the people to ensure the healthy operation of production, sales and service. To strengthen communication with customers and to provide our customers with quality products and perfect service, we hereby make the following commitments:
Product Standards
Products are designed, manufactured, and inspected strictly in accordance with China\'s GB, HG standards, and US API standards. The hardness of the sealing surface meets the national requirements and the width exceeds the national standard.
pre-sale service
Product introduction, technical communication, non-standard product design, troubleshooting.
Sale service
Trustworthy contracts, guarantee timely delivery, and keep in touch with customers at any time.
For special or complex products, our factory arranges technicians to train and guide users on product use, troubleshooting, tuning and maintenance.
After sales service
The warranty period of Weitong products is 12 months from the factory, and the "three guarantees" service (return, replacement, repair) is implemented.
During the use of our products, our factory regularly organizes technical and inspection personnel to visit and solicit user feedback on product quality, use conditions, and improvement opinions in order to further improve product quality.
Quickly respond to customer complaints about product quality problems, and after-sales service personnel rushed to the scene within 24-36 hours (48 hours outside the province).
For after-sales service, users are required to fill in the quality feedback form after the service and make appraisal opinions, while improving Guardian\'s service quality.
Order process
Landline: 021-59718851 (AM-8: 30 to PM-17: 30)
Mobile phone: 18918462396 (WeChat same number 24-hour service)
QQ: 2030185432
Email: kunage@126.com
Receive customer purchase list, provide customers with valve model selection and quotation (price list).
Specific agreement: delivery time, special requirements, etc.
download Google:
Customers have special requirements for products, and must provide the following instructions in the order contract:
(1) Structure length;
(2) Connection form;
(3) Nominal diameter, full diameter, reduced diameter, pipe size;
(4) Operating medium, temperature and pressure range;
(5) Experiment, inspection standards and other requirements;
(6) Various driving devices can be configured in this field according to the special requirements of customers;
If the determined valve type and model are provided by the customer, the customer should correctly explain the meaning and requirements of its model, and sign the contract under the conditions that the supply and demand sides understand and agree.
∷
KUNAG
KUNAG
KUNAGE