Product name: Imported inverted bucket trap Model:
Buhrer
Drive method: automatic Connection form: flange, thread
Structural form: Bell-shaped float type Seal structure: Spherical
Pressure range: 1.0MPa-6.4MPa Nominal dia
meter: DN15-50
Common materials: WCB, 304, 316, etc.
Product introduction
The imported inverted bucket trap produced by Brel can be driven by automatic, flanged, threaded, bell-float, and spherical. The pressure range is PN1.0MPa-6.4MPa The nominal dia
meter is DN15-50mm, and the materials can be WCB, 304, 316, etc. Because the valve is used in a very wide range, the same valve has different combinations in different situations and working conditions.
Product Details
Imported inverted bucket steam trap-
Buhrer brand It uses the working principle of the difference between condensed water and steam density. The internal structure is connected to the inverted bucket by a lever system to overcome the steam pressure switch. Inside the inverted bucket type trap is an inverted bucket which is a level sensitive part, and the opening of the bucket is downward. When the device was just started, air and low-temperature condensate appeared in the pipeline. At this time, the trap was fully open, and the air and low-temperature condensate were quickly discharged. The device quickly raised the temperature. When steam enters the inverted bucket, the inverted bucket generates upward buoyancy, and the connecting lever of the inverted bucket drives the valve core to close the valve. A small hole is opened in the inverted bucket to automatically discharge air. When part of the steam is discharged from the small hole and the other part of the steam generates condensed water, the inverted bucket loses buoyancy and sinks downward. When the steam enters the inverted bucket again, the valve is closed again, the cycle works, and the drainage is intermittent.
Inverted bucket steam trap is one of the most sturdy traps in mechanical steam traps. Its advantages are: it is not afraid of water hammer, can continuously discharge non-condensable gas, and has good anti-fouling performance. The maximum back pressure is ≥90%. All The internal parts are made of stainless steel, which is resistant to wear and corrosion. The ball valve seat and valve seat are in line contact with good sealing performance and long service life. Intermittent drainage and continuous drainage can drain condensate close to saturation temperature, so that the heating equipment can Optimal work efficiency. The valve seat of the inverted bucket steam trap is under the protection of a water seal, no fresh steam leaks during operation, and the energy saving effect is good.
It is suitable for the steam blocking and drainage of steam heating equipment and steam pipe networks in the petroleum, chemical, printing, papermaking, and pharmaceutical industries.
Professional manufacturing and professional services, KUNAG creates more value for you
Continuously improving the quality of services and keeping improving, "sincere service" is the eternal theme of KUNAG. Kunag strictly complies with the requirements of ISO9001-2000 quality system certification, strictly controls the quality and responsibilities to the people to ensure the healthy operation of production, sales and service. To strengthen communication with customers and to provide our customers with quality products and perfect service, we hereby make the following commitments:
Product Standards
Products are designed, manufactured, and inspected strictly in accordance with China\'s GB, HG standards, and US API standards. The hardness of the sealing surface meets the national requirements and the width exceeds the national standard.
pre-sale service
Product introduction, technical communication, non-standard product design, troubleshooting.
Sale service
Trustworthy contracts, guarantee timely delivery, and keep in touch with customers at any time.
For special or complex products, our factory arranges technicians to train and guide users on product use, troubleshooting, tuning and maintenance.
After sales service
The warranty period of Weitong products is 12 months from the factory, and the "three guarantees" service (return, replacement, repair) is implemented.
During the use of our products, our factory regularly organizes technical and inspection personnel to visit and solicit user feedback on product quality, use conditions, and improvement opinions in order to further improve product quality.
Quickly respond to customer complaints about product quality problems, and after-sales service personnel rushed to the scene within 24-36 hours (48 hours outside the province).
For after-sales service, users are required to fill in the quality feedback form after the service and make appraisal opinions, while improving Guardian\'s service quality.
Order process
Landline: 021-59718851 (AM-8: 30 to PM-17: 30)
Mobile phone: 18918462396 (WeChat same number 24-hour service)
QQ: 2030185432
Email: kunage@126.com
Receive customer purchase list, provide customers with valve model selection and quotation (price list).
Specific agreement: delivery time, special requirements, etc.
download Google:
Customers have special requirements for products, and must provide the following instructions in the order contract:
(1) Structure length;
(2) Connection form;
(3) Nominal diameter, full diameter, reduced diameter, pipe size;
(4) Operating medium, temperature and pressure range;
(5) Experiment, inspection standards and other requirements;
(6) Various driving devices can be configured in this field according to the special requirements of customers;
If the determined valve type and model are provided by the customer, the customer should correctly explain the meaning and requirements of its model, and sign the contract under the conditions that the supply and demand sides understand and agree.
∷
KUNAG
KUNAG
KUNAGE