Imported electric single seat control valve
American YLOK imported electric single-seat control valve adopts top guide structure, compact structure, S-shaped six-wire fluid passage, small pressure drop loss, large flow, wide adjustable range, and high flow characteristic accuracy. The guide area of the spool guide part is large and it has the characteristics of strong shock resistance. The closing performance of the valve seat conforms to the GB/T4213-92 standard. The regulating valve is equipped to receive ON-OFF or 4-20mADC or 1-5V DC signals for proportional action. The small, sturdy, high-precision actuator is more suitable for use in high-temperature, low-temperature and high-pressure situations requiring high reliability and closing performance. Imported electric straight-through single-seat control valve parameters:
1. Valve body parameters:
Nominal diameter: DN20-DN450
Nominal pressure: 1.0Mpa-10Mpa
Applicable temperature: -60℃~560℃
Connection method: flange connection
Applicable medium: water, steam, oil, etc.
Body material: cast steel, carbon steel, stainless steel
Spool structure: single seat plunger spool
Flange face distance: GB12221-89
Flange standards: GB/T9113-2010; JB/T79.1-94; JB/T79.2-94; HG/T20592-2009; ANSI; JIS; DIN
Imported electric single seat control valve actuator:
Manual device: with handle
Protection level: IP55
Explosion-proof grade: ExdⅡBT4
Control action: proportional control or ON-OFF control
Power signal: AC220V, 50Hz
Output signal: 4-20mADC (load resistance below 500Ω)
Input signal: 4-20mADC or 1-5VDC must select the position of the regulating valve when the input signal is "off" (hold position, fully open, fully closed)
3. Performance parameters:
Return difference: ≤1%
Dead zone: ≤1%
Basic error: ±1%
Adjustable range: 50:1
Flow characteristics: linear, equal percentage
Seat leakage rate (for rated Kv value %): metal seal is less than 0.01% (ANSIB16.104-1976 IV) and less than 0.001% (optional); soft seal is less than 0.00001% (ANSIB16.104-1976 VI)

Professional manufacturing and professional services, KUNAG creates more value for you
Continuously improving the quality of services and keeping improving, "sincere service" is the eternal theme of KUNAG. Kunag strictly complies with the requirements of ISO9001-2000 quality system certification, strictly controls the quality and responsibilities to the people to ensure the healthy operation of production, sales and service. To strengthen communication with customers and to provide our customers with quality products and perfect service, we hereby make the following commitments:
Product Standards
Products are designed, manufactured, and inspected strictly in accordance with China\'s GB, HG standards, and US API standards. The hardness of the sealing surface meets the national requirements and the width exceeds the national standard.
pre-sale service
Product introduction, technical communication, non-standard product design, troubleshooting.
Sale service
Trustworthy contracts, guarantee timely delivery, and keep in touch with customers at any time.
For special or complex products, our factory arranges technicians to train and guide users on product use, troubleshooting, tuning and maintenance.
After sales service
The warranty period of Weitong products is 12 months from the factory, and the "three guarantees" service (return, replacement, repair) is implemented.
During the use of our products, our factory regularly organizes technical and inspection personnel to visit and solicit user feedback on product quality, use conditions, and improvement opinions in order to further improve product quality.
Quickly respond to customer complaints about product quality problems, and after-sales service personnel rushed to the scene within 24-36 hours (48 hours outside the province).
For after-sales service, users are required to fill in the quality feedback form after the service and make appraisal opinions, while improving Guardian\'s service quality.

Order process
Landline: 021-59718851 (AM-8: 30 to PM-17: 30)
Mobile phone: 18918462396 (WeChat same number 24-hour service)

QQ: 2030185432

Email: kunage@126.com
Receive customer purchase list, provide customers with valve model selection and quotation (price list).
Specific agreement: delivery time, special requirements, etc.
download Google:
Customers have special requirements for products, and must provide the following instructions in the order contract:
(1) Structure length;
(2) Connection form;
(3) Nominal diameter, full diameter, reduced diameter, pipe size;
(4) Operating medium, temperature and pressure range;
(5) Experiment, inspection standards and other requirements;
(6) Various driving devices can be configured in this field according to the special requirements of customers;
If the determined valve type and model are provided by the customer, the customer should correctly explain the meaning and requirements of its model, and sign the contract under the conditions that the supply and demand sides understand and agree.

Contact: Peng gong
Q Q: 2030185432
Mobile: 18918462396(WeChat same number - 24 hours service)
Landline: 021-59718851
E-mail :kunage@126.com