Product name: Imported three-way ball valve with internal thread Product model: Buhrer
Drive method: manual, pneumatic, electric Connection: thread, flange, wafer type, welding, ferrule, etc.
Structure: floating ball, fixed ball Seal structure: PTFE, PPL, hard seal
Pressure range: 1.0MPa-6.4MPa Nominal diameter: DN15-100
Common materials: WCB, stainless steel, 304, 316, chrome molybdenum steel, titanium alloy steel, etc.
Product introduction
The imported internally threaded three-way ball valve produced by Breer can be driven manually, pneumatically, electrically, and threaded, flanged, wafer-type, welded, ferrule, etc. The structure can be used with floating balls and fixed balls. The sealing structure can choose PTFE, PPL, hard seal, pressure range PN1.0MPa-6.4MPa, nominal diameter is DN15-100mm, material can choose WCB, stainless steel, 304,316, chromium molybdenum steel, titanium alloy steel, etc. Because the valve is used in a very wide range, the same valve has different combinations in different situations and working conditions.
Product Details
The imported threaded three-way ball valve has T-type and L-type. The T type can make three orthogonal pipelines communicate with each other and cut off the third channel, and plays a role of diverting and converging. The L type can only connect two pipes that are orthogonal to each other, and cannot keep the third pipe connected to each other at the same time, only for distribution.
Standard specifications of imported three-way ball valve:
Size range: DN6 ~ 100
Pressure level: 1.0MPa-50MPa
Applicable temperature: -29 ～ 350 ℃
Working voltage: 24V, 220V, 380V
Body material: carbon steel, stainless steel
Applicable medium: gas, liquid
Operation mode: manual, pneumatic, electric
Features of imported three-way ball valve
1. The imported threaded three-way ball valve adopts an integrated structure in structure. The sealing type of the 4-sided valve seat has fewer flange connections, high reliability, and lightweight design.
2. The imported threaded three-way ball valve is divided into T type and L type, with long service life, large flow capacity and low resistance.
3. The imported threaded three-way ball valve is divided into single-acting and double-acting types according to the function. The single-acting type is characterized in that the ball valve will be in the state required by the control system if the power source fails
Ball valve and gate valve are the same type of valve. The difference is that the closing part is a ball. The ball rotates around the center line of the valve body to open and close the valve. Ball valve is mainly used in the pipeline to cut off, distribute and change the flow direction of the medium. Ball valve is a new type of valve widely used in recent years, which has the following advantages: 1. The fluid resistance is small, and its resistance coefficient is equal to the pipe section of the same length. 2. Simple structure, small size and light weight. 3． It is tight and reliable. At present, the sealing surface of ball valves is widely used in plastics and has good sealing performance. 4． Easy operation, fast opening and closing, only need to rotate 90 ° from fully open to fully closed, which is convenient for remote control. 5． Easy maintenance, simple structure of ball valve, seal ring is usually movable, and it is more convenient to disassemble and replace. 6. When fully open or fully closed, the sealing surfaces of the ball and valve seat are isolated from the medium, and the medium will not cause erosion of the valve sealing surface when the medium passes. 7. Wide range of applications, from small diameter to several millimeters, large to several meters, from high vacuum to high pressure can be applied.
How a three-way ball valve works
L-shaped three-way four-sided seated ball valve adopts two-sided seat, which is balanced by force to ensure reliable sealing on the closed channel. Mainly used for commutation of the flow path.
T-type three-way, 4-sided seated ball valve adopts 4-sided seat, which is balanced by force to ensure reliable sealing on the closed channel. It is mainly used for shunting, mixing, commutation and full opening of three channels.
Imported hydraulic high pressure ball valve-bueller valve Co., ltd.

Order process
Landline: 021-59718851 (AM-8: 30 to PM-17: 30)
Mobile phone: 18918462396 (WeChat same number 24-hour service)

QQ: 2030185432

Email: kunage@126.com
Receive customer purchase list, provide customers with valve model selection and quotation (price list).
Specific agreement: delivery time, special requirements, etc.
download Google:
Customers have special requirements for products, and must provide the following instructions in the order contract:
(1) Structure length;
(2) Connection form;
(3) Nominal diameter, full diameter, reduced diameter, pipe size;
(4) Operating medium, temperature and pressure range;
(5) Experiment, inspection standards and other requirements;
(6) Various driving devices can be configured in this field according to the special requirements of customers;
If the determined valve type and model are provided by the customer, the customer should correctly explain the meaning and requirements of its model, and sign the contract under the conditions that the supply and demand sides understand and agree.