Product name: Imported electric three-way ball valve Product model: Buhrer series
Drive method: electric, pneumatic, manual Connection form: flange, thread
Structure: Floating ball, fixed ball Seal structure: PTFE, PPL, metal hard seal
Pressure range: 1.0MPa-10MPa Nominal diameter: DN15-300
Common materials: WCB, stainless steel, 304, 316, chrome molybdenum steel, titanium alloy steel, etc.
Product introduction
The imported electric three-way ball valve produced by Breer can be driven by electric, pneumatic, manual, flanged, threaded, and floating ball structures, fixed ball type, PTFE, PPL, and metal hardened Sealed, pressure range PN1.0MPa-10MPa, nominal diameter is DN15-300mm, material can choose WCB, stainless steel, 304,316, chromium molybdenum steel, titanium alloy steel, etc. Because the valve is used in a very wide range, the same valve has different combinations in different situations and working conditions.
Product Details
The imported electric three-way ball valve products use 220V single-phase AC power as the power source, accept the 220V switching signal from the control system (or operator), and switch the reversible single-phase gear reduction motor through single-phase power switching. The ball valve realizes the reversing effect on the pipeline fluid. Three-way ball valve is a valve that can switch the flow direction of the medium and split or mix the medium.The three-way ball valve is divided into L-type and T-type. The L-type three-way ball valve is suitable for switching the medium flow direction and can make each other vertical. Two channels are connected; T-type three-way ball valve is suitable for medium flow splitting, confluence, or flow direction switching. T-channels can connect three channels to each other or two of them. Three-way ball valves generally use two valve seat structures. Can also be used according to
Households require a four-seat structure. Standard specifications:
Size range: DN15 ~ 300
Pressure rating: ANSI 150lb ~ 300lb
Applicable temperature: -29 ～ 500 ℃
Working voltage: 220V, 380V
Body material: carbon steel, stainless steel
Applicable medium: gas, liquid
Operation mode: manual, pneumatic, electric
Features:
l Multi-purpose valve: any port can be used as an inlet without leakage, and the three-way can be made into L-shaped port or T-shaped port
l Compact structure, rapid opening and closing, unobstructed flow channels, and low fluid resistance
l Good sealing performance: use PTFE valve seat material Teflon elastic deformation non-leakage seal
The imported electric three-way ball valve consists of an electric actuator and a three-way ball valve. By changing the relative positions of the core and the pipe, different combinations of control of the three pipeline fluids can be achieved. This product uses 220V single-phase AC power as the power source, accepts the 220V switching signal from the control system (or operator), and drives the reversible single-phase gear reduction motor through single-phase power switching. According to the specified combination requirements, the ball valve can achieve the pipe Reversing effect of road fluid. The T-type tee can make the three orthogonal pipes communicate with each other, that is, it plays the role of diversion (combination), or it can make two of the pipes communicate and cut off the other pipe. The L-shaped three-way flow path can only connect two pipes or switching directions that are orthogonal to each other.

Order process
Landline: 021-59718851 (AM-8: 30 to PM-17: 30)
Mobile phone: 18918462396 (WeChat same number 24-hour service)

QQ: 2030185432

Email: kunage@126.com
Receive customer purchase list, provide customers with valve model selection and quotation (price list).
Specific agreement: delivery time, special requirements, etc.
download Google:
Customers have special requirements for products, and must provide the following instructions in the order contract:
(1) Structure length;
(2) Connection form;
(3) Nominal diameter, full diameter, reduced diameter, pipe size;
(4) Operating medium, temperature and pressure range;
(5) Experiment, inspection standards and other requirements;
(6) Various driving devices can be configured in this field according to the special requirements of customers;
If the determined valve type and model are provided by the customer, the customer should correctly explain the meaning and requirements of its model, and sign the contract under the conditions that the supply and demand sides understand and agree.