Product name: Imported high viscosity solenoid valve Product model: Buhrer series
Drive method: electromagnetic connection: flange, thread
Structural form: Piston type, Pilot type, Direct acting Seal structure: Piston type
Pressure range: 1.6-100MPa Nominal diameter: DN1-500
Common materials: 304,316, titanium alloy steel, etc.
Product introduction
The imported high-viscosity solenoid valve produced by Breer can be driven by electromagnetic, flanged by screw, screwed by piston, pilot-operated, direct-acting, and piston-shaped by sealed structure, pressure range PN1. 6-100MPa, the nominal diameter is DN1-500mm, the material can choose 304,316, titanium alloy steel and so on. Because the valve is used in a very wide range, the same valve has different combinations in different situations and working conditions.
Product Details
Imported high-viscosity solenoid valve-Buhrer brand fluid high viscosity: Usually can be arbitrarily selected below 50cst, if it exceeds this value, you need to choose high-viscosity solenoid valve. Widely used in high and medium voltage electromagnetic fields such as aerospace, shipbuilding, petrochemical, industrial furnaces, boilers, water supply and drainage, heating and air conditioning, fire protection equipment, drying equipment, food and medical equipment, cleaning equipment, landscape sprinkler irrigation, water plants and other pipelines Valve products. This product is a pilot-operated structure. The valve core is a stainless steel piston. The piston ring will not be stuck by impurities in the medium. It has high dynamic sealing performance and long life. There is no direct friction between the piston and the metal valve cavity. The installation direction of the valve body is unlimited. ; Dedicated coil, not easy to burn; Stop and restart for a long time, the action is also sensitive; Zero leakage; Service life is more than 1 million times.

A series of imported solenoid valves of the American Buhrer brand: high-viscosity solenoid valves, petroleum solenoid valves, direct-acting solenoid valves, step-by-step direct-acting solenoid valves, low-pressure solenoid valves, high-pressure solenoid valves, ultra-high-pressure solenoid valves, ultra-high-temperature solenoid valves , Steam solenoid valve, low temperature solenoid valve, anti-corrosion solenoid valve, diving solenoid valve, gas solenoid valve, gas fast cut-off solenoid valve, gas safety solenoid valve, vacuum solenoid valve, pulse solenoid valve, self-protection solenoid valve, two-position three Solenoid valve, solenoid valve with manual function, solenoid valve with signal function, etc.

Main technical parameters of imported high viscosity solenoid valve:
Product specifications: DN1 ～ DN500
Body material: cast steel, stainless steel, etc.
Applicable medium: petroleum, gas, oil, gas, gas, paste, glue corrosive fluid, etc.
Temperature range: -100 to + 550 ° C
Medium viscosity: less than 50C St
Protection performance: waterproof, explosion-proof (Exd IICT5), anti-corrosion
Wiring method: terminal block type; lead type; plug type
Control method: normally open, normally closed
Power supply voltage: DC24V; AC36 ～ 380V: DC6V—DC220V
Connection method: internal thread, flange, external thread
Leakage: Zero
Imported high-viscosity solenoid valve working principle: normally closed: When the coil is energized, the pilot valve core is pulled in, the pilot hole is opened, the upper cavity of the valve is released, the piston is pushed by the pressure of the lower cavity medium, and the solenoid valve is opened; The pilot valve core is reset by the spring, the pilot hole is closed, the valve cavity is pressurized by the piston orifice, and the thrust of the reset spring is closed, and the solenoid valve is closed. Normally open: When the coil is energized, the pilot hole is closed, the upper cavity of the valve is pressurized by the piston orifice and the thrust of the return spring, and the solenoid valve is closed. When the coil is de-energized, the pilot valve core is reset by the spring, the pilot hole is opened, the upper cavity of the valve is depressurized, the piston is pushed by the pressure of the lower cavity medium, and the solenoid valve is opened.
Performance characteristics: wide versatility, high sensitivity, strong tightness, long life,
Notes: 1. If the fluid contains impurities, a filter valve (30-80 mesh / inch) must be installed at the inlet of the solenoid valve, and there is no solidification and crystallization. 2. There are no restrictions on the installation position of the solenoid valve. (S-horizontal installation, C-vertical installation)

Order process
Landline: 021-59718851 (AM-8: 30 to PM-17: 30)
Mobile phone: 18918462396 (WeChat same number 24-hour service)

QQ: 2030185432

Email: kunage@126.com
Receive customer purchase list, provide customers with valve model selection and quotation (price list).
Specific agreement: delivery time, special requirements, etc.
download Google:
Customers have special requirements for products, and must provide the following instructions in the order contract:
(1) Structure length;
(2) Connection form;
(3) Nominal diameter, full diameter, reduced diameter, pipe size;
(4) Operating medium, temperature and pressure range;
(5) Experiment, inspection standards and other requirements;
(6) Various driving devices can be configured in this field according to the special requirements of customers;
If the determined valve type and model are provided by the customer, the customer should correctly explain the meaning and requirements of its model, and sign the contract under the conditions that the supply and demand sides understand and agree.