Product name: Imported gas safety solenoid valve Product model: Buhrer series
Drive method: electromagnetic connection: flange, thread
Structure: Pilot type, Piston type Seal structure: Piston type
Pressure range: 0.6MPa-6.4MPa Nominal diameter: DN1-500
Common materials: WCB, 304, 316, etc.
Product introduction
The imported gas safety solenoid valve produced by Brel can be driven by electromagnetic, flanged by thread, screwed by structure, piloted by piston, piston by sealed, and pressured by PN , The nominal diameter is DN1-500mm, and the material can be WCB, 304, 316, etc. Because the valve is used in a very wide range, the same valve has different combinations in different situations and working conditions.
Product Details
Imported gas safety solenoid valve-Buhrer brand working principle: When the solenoid valve needs to be opened, the solenoid valve coil is energized first, and then the protective sleeve on the top of the valve is unscrewed, and the handle is pulled outwards, the solenoid valve is opened, and then the protective sleeve is Protection handle in situ. When the solenoid valve needs to be closed, the coil is powered off instantly, and the solenoid valve is quickly closed.
Application range of imported gas safety solenoid valve:
It is widely used in industrial furnaces, boilers, gas pipeline networks, gas processing plants, gas stations, gas leakage alarm systems, safety protection systems, fire alarm systems and other cities or factories to cut off flammable and explosive media; when potential accidents are found Quickly cut off to prevent vicious accidents in time.
Features of imported gas safety solenoid valve:
The solenoid valve coil consumes 10W, the temperature does not exceed 10 ℃, and the coil can be kept open for a long period of time. The power failure or shut-off valve closes quickly. After the valve coil is powered off or closed, the valve will not open automatically when it is called again. It must be manually opened to save the valve; energy saving; zero pressure start, zero leakage.
A series of imported solenoid valves of the American Buhrer brand: direct-acting solenoid valves, step-wise direct-acting solenoid valves, medium-low pressure solenoid valves, high-pressure solenoid valves, ultra-high-pressure solenoid valves, ultra-high temperature solenoid valves, steam solenoid valves, low-temperature solenoid valves, Anti-corrosion solenoid valve, diving solenoid valve, gas solenoid valve, gas fast shut-off solenoid valve, gas safety solenoid valve, vacuum solenoid valve, pulse solenoid valve, self-protection solenoid valve, two-position three-way solenoid valve, solenoid valve with manual function , Solenoid valve with signal function, etc.
Main technical parameters of imported gas safety solenoid valve:
Product specifications: DN20--DN500
Body material: cast steel, stainless steel (cast steel body cannot be used on corrosive fluids)
Pressure range: 0 ～ 0.6MPa
Applicable medium: gas, natural gas, liquefied gas, biogas, methane, and other gases or fuel oil
Medium temperature: -20 ～ + 100 ℃
Protection: Waterproof and explosion-proof (Exd IICT5)
Wiring method: lead type; plug type
Power supply voltage: DC12 ～ 127V; AC36 ～ 380V
Connection method: pipe connection, flange

Order process
Landline: 021-59718851 (AM-8: 30 to PM-17: 30)
Mobile phone: 18918462396 (WeChat same number 24-hour service)

QQ: 2030185432

Email: kunage@126.com
Receive customer purchase list, provide customers with valve model selection and quotation (price list).
Specific agreement: delivery time, special requirements, etc.
download Google:
Customers have special requirements for products, and must provide the following instructions in the order contract:
(1) Structure length;
(2) Connection form;
(3) Nominal diameter, full diameter, reduced diameter, pipe size;
(4) Operating medium, temperature and pressure range;
(5) Experiment, inspection standards and other requirements;
(6) Various driving devices can be configured in this field according to the special requirements of customers;
If the determined valve type and model are provided by the customer, the customer should correctly explain the meaning and requirements of its model, and sign the contract under the conditions that the supply and demand sides understand and agree.