Product name: Imported stainless steel solenoid valve Product model: Buhrer series
Drive method: electromagnetic connection: flange, thread
Structure: Piston, Pilot, Direct acting Sealing structure: Piston, PTFE
Pressure range: 1.6-100MPa Nominal diameter: DN1-500
Common materials: stainless steel, 304, 316, titanium alloy steel, etc.
Product introduction
The imported stainless steel solenoid valve produced by Breer, the driving method can be electromagnetic, the connection method can be flange, thread, the structure can be piston type, pilot type, direct-acting type, and the sealing structure can be piston type, PTFE, pressure range PN1 .6-100MPa, nominal diameter is DN1-500mm, stainless steel, 304,316, titanium alloy steel, etc. Because the valve is used in a very wide range, the same valve has different combinations in different situations and working conditions.
Product Details
American Buhrer brand imported stainless steel solenoid valve This product is a pilot-operated structure. The valve core is a stainless steel piston. The piston ring will not be stuck by impurities in the medium. It has high dynamic sealing performance and long life. There is no direct friction between the piston and the metal valve cavity. There is no restriction on the installation direction of the valve body; the dedicated coil is not easy to burn out; the operation is restarted for a long time, and the action is also sensitive; the leakage is zero; the service life is more than 1.5 million times.
A series of imported solenoid valves of the American Buhrer brand: direct-acting solenoid valves, step-wise direct-acting solenoid valves, medium-low pressure solenoid valves, high-pressure solenoid valves, ultra-high-pressure solenoid valves, ultra-high temperature solenoid valves, steam solenoid valves, low-temperature solenoid valves, Anti-corrosion solenoid valve, diving solenoid valve, gas solenoid valve, gas fast shut-off solenoid valve, gas safety solenoid valve, vacuum solenoid valve, pulse solenoid valve, self-protection solenoid valve, two-position three-way solenoid valve, solenoid valve with manual function , Solenoid valve with signal function, etc.
Main technical parameters of imported stainless steel solenoid valve:
Product specifications: DN1 ～ DN500
Body material: stainless steel
Applicable medium: water, gas, oil, steam, gas, corrosive fluid, etc.
Temperature range: -100 to + 550 ° C
Medium viscosity: less than 50C St
Protection performance: waterproof, explosion-proof (Exd IICT5), anti-corrosion
Wiring method: terminal block type; lead type; plug type
Control method: normally open, normally closed
Power supply voltage: DC12 ～ 127V; AC36 ～ 380V
Connection method: internal thread, flange, external thread
Leakage: Zero
Imported stainless steel solenoid valve working principle: Normally closed: When the coil is energized, the pilot valve core is pulled in, the pilot hole is opened, the upper cavity of the valve is depressurized, the piston is pushed by the pressure of the lower cavity medium, and the solenoid valve is opened; when the coil is powered off, the pilot The valve core is reset by the spring, the pilot hole is closed, the valve cavity is pressurized by the piston throttle hole and the thrust of the return spring is closed, and the solenoid valve is closed. Normally open: When the coil is energized, the pilot hole is closed, the upper cavity of the valve is pressurized by the piston orifice and the thrust of the return spring, and the solenoid valve is closed. When the coil is de-energized, the pilot valve core is reset by the spring, the pilot hole is opened, the upper cavity of the valve is depressurized, the piston is pushed by the pressure of the lower cavity medium, and the solenoid valve is opened.

Order process
Landline: 021-59718851 (AM-8: 30 to PM-17: 30)
Mobile phone: 18918462396 (WeChat same number 24-hour service)

QQ: 2030185432

Email: kunage@126.com
Receive customer purchase list, provide customers with valve model selection and quotation (price list).
Specific agreement: delivery time, special requirements, etc.
download Google:
Customers have special requirements for products, and must provide the following instructions in the order contract:
(1) Structure length;
(2) Connection form;
(3) Nominal diameter, full diameter, reduced diameter, pipe size;
(4) Operating medium, temperature and pressure range;
(5) Experiment, inspection standards and other requirements;
(6) Various driving devices can be configured in this field according to the special requirements of customers;
If the determined valve type and model are provided by the customer, the customer should correctly explain the meaning and requirements of its model, and sign the contract under the conditions that the supply and demand sides understand and agree.