Product name: Solenoid valve for imported water Product model: Buhrer series
Drive method: electromagnetic connection: flange, thread
Structure: Pilot, Piston, Direct-acting Seal structure: Soft seal, Hard seal
Pressure range: 1.0MPa-6.4MPa Nominal diameter: DN1-500
Common materials: cast iron, copper, stainless steel, etc.
Product introduction
The imported water solenoid valve produced by Breer, the driving method can be electromagnetic, the connection method can be flange, thread, the structure can be pilot, piston, direct-acting, and the sealing structure can be soft seal, hard seal, pressure The range is PN1.0MPa-6.4MPa, the nominal diameter is DN1-500mm, and the material can be cast iron, copper, stainless steel, etc. Because the valve is used in a very wide range, the same valve has different combinations in different situations and working conditions.
Product Details
Features of imported water solenoid valve:
The solenoid valve core of imported water is made of stainless steel and piston structure; the action response is fast; the special coil adopts waterproof method and is not easy to burn; the action is restarted for a long time and the action is equally sensitive; the service life is more than 1 million times.
Application range of imported water solenoid valve:
Imported solenoid valve for water It is mainly used in piping systems such as landscape sprinkler irrigation, ship heavy industry, petrochemical industry, urban water supply and drainage, cleaning equipment, water plants and so on.
A series of imported solenoid valves of the American Buhrer brand: direct-acting solenoid valves, step-wise direct-acting solenoid valves, medium-low pressure solenoid valves, high-pressure solenoid valves, ultra-high-pressure solenoid valves, ultra-high temperature solenoid valves, steam solenoid valves, low-temperature solenoid valves, Anti-corrosion solenoid valve, diving solenoid valve, gas solenoid valve, gas fast shut-off solenoid valve, gas safety solenoid valve, vacuum solenoid valve, pulse solenoid valve, self-protection solenoid valve, two-position three-way solenoid valve, solenoid valve with manual function , Solenoid valve with signal function, etc.
Pilot operated principle of solenoid valve for imported water:

Normally closed: When the coil is energized, the pilot valve core is closed, the pilot hole is opened, the upper cavity of the valve is depressurized, the piston is pushed by the pressure of the lower cavity medium, and the solenoid valve is opened.
When the coil is de-energized, the pilot valve core is reset by the spring, the pilot hole is closed, the upper cavity of the valve is pressurized by the piston throttle hole and the thrust of the return spring is closed, and the solenoid valve is closed.

Normally open: When the coil is energized, the pilot valve core is reset by the spring, the pilot hole is closed, the upper cavity of the valve is pressurized by the piston orifice, and the thrust of the return spring is closed, and the solenoid valve is closed.
When the coil is de-energized, the pilot valve core is reset by the spring, the pilot hole is opened, the upper cavity of the valve is depressurized, the piston is pushed by the pressure of the lower cavity medium, and the solenoid valve is opened.
Main technical parameters of solenoid valve for imported water:
Product specifications: DN2.5--DN500
Body material: cast steel body, stainless steel (cast steel body cannot be used on corrosive fluids)
Applicable medium: water, gas, oil, corrosive fluid, etc.
Temperature range: -20 ～ + 120 ℃
Medium viscosity: less than 50C St
Protection: Waterproof, explosion-proof (Exd IICT5), anti-corrosion
Wiring method: lead
Control method: normally open, normally closed
Power supply voltage: DC24 ～ 127V; AC36 ～ 380V
Connection method: internal thread, flange (external thread and special interface can be customized or add adapter)
Leakage: Zero

Order process
Landline: 021-59718851 (AM-8: 30 to PM-17: 30)
Mobile phone: 18918462396 (WeChat same number 24-hour service)

QQ: 2030185432

Email: kunage@126.com
Receive customer purchase list, provide customers with valve model selection and quotation (price list).
Specific agreement: delivery time, special requirements, etc.
download Google:
Customers have special requirements for products, and must provide the following instructions in the order contract:
(1) Structure length;
(2) Connection form;
(3) Nominal diameter, full diameter, reduced diameter, pipe size;
(4) Operating medium, temperature and pressure range;
(5) Experiment, inspection standards and other requirements;
(6) Various driving devices can be configured in this field according to the special requirements of customers;
If the determined valve type and model are provided by the customer, the customer should correctly explain the meaning and requirements of its model, and sign the contract under the conditions that the supply and demand sides understand and agree.