Product name: Imported lever float ball trap Model:
Buhrer series
Drive method: automatic Connection form: flange, thread
Structure: Float type Seal structure: Water seal
Pressure range: 0.6MPa-4.0MPa Nominal dia
meter: DN15-100
Common materials: WCB, 304, 316, etc.
Product introduction
The imported lever float ball trap produced by Breer, the drive mode can be automatic, the connection mode can be flange, thread, the structure can be float type, and the seal structure can be water seal. The pressure range is PN0.6MPa-4.0MPa , The nominal dia
meter is DN15-100mm, and the material can be WCB, 304, 316, etc. Because the valve is used in a very wide range, the same valve has different combinations in different situations and working conditions.
Product Details
Imported lever float ball trap-The
Buhrer brand uses the principle of buoyancy and the principle of leverage to make the float rise or fall through the change in liquid level. The float drives the lever to make the valve flap leave or contact the valve seat to open the drainage and close the steam barrier. Role. The automatic air exhaust valve can automatically exclude non-condensing gas, which is very sensitive, high quality and long service life. Continuous drainage, drain when there is water, the minimum subcooling is 0 ℃. The lever float ball trap uses two structures: A: single valve seat-lever float; B: double balanced valve seat-lever float.
Single valve seat: It is necessary to overcome the effect of the medium pressure on the valve seat. The hole dia
meter of the valve seat cannot be very large. It is suitable for small equipment, heat tracing pipelines, steam main pipes and other places with small drainage. The valve seat hole is designed below the level of condensed water, forming a water seal naturally, and the water and steam are naturally separated to achieve no steam leakage. Even if there is no condensed water, the ball seal is used to make the valve cling to the valve seat to achieve no fresh steam leakage. . Not affected by fluctuations in condensate and temperature.
Double-balanced valve seat: The valve uses a double valve hole design. The pressure of the medium acts equally on the two valve seats in opposite directions. The medium pressure cancels the effect of the valve seat. The pressure of the valve core is relatively reduced when the valve is opened. the amount. When working, the floating ball floats up and down with the change of the liquid level in the valve cavity, which drives the lever to open or close the valve seat. Because the valve seat hole is below the level of condensed water, a water seal is formed, and water and steam are naturally separated to achieve no steam leakage. Not affected by pressure, temperature, and condensate flow fluctuations.
Professional manufacturing and professional services, KUNAG creates more value for you
Continuously improving the quality of services and keeping improving, "sincere service" is the eternal theme of KUNAG. Kunag strictly complies with the requirements of ISO9001-2000 quality system certification, strictly controls the quality and responsibilities to the people to ensure the healthy operation of production, sales and service. To strengthen communication with customers and to provide our customers with quality products and perfect service, we hereby make the following commitments:
Product Standards
Products are designed, manufactured, and inspected strictly in accordance with China\'s GB, HG standards, and US API standards. The hardness of the sealing surface meets the national requirements and the width exceeds the national standard.
pre-sale service
Product introduction, technical communication, non-standard product design, troubleshooting.
Sale service
Trustworthy contracts, guarantee timely delivery, and keep in touch with customers at any time.
For special or complex products, our factory arranges technicians to train and guide users on product use, troubleshooting, tuning and maintenance.
After sales service
The warranty period of Weitong products is 12 months from the factory, and the "three guarantees" service (return, replacement, repair) is implemented.
During the use of our products, our factory regularly organizes technical and inspection personnel to visit and solicit user feedback on product quality, use conditions, and improvement opinions in order to further improve product quality.
Quickly respond to customer complaints about product quality problems, and after-sales service personnel rushed to the scene within 24-36 hours (48 hours outside the province).
For after-sales service, users are required to fill in the quality feedback form after the service and make appraisal opinions, while improving Guardian\'s service quality.
Order process
Landline: 021-59718851 (AM-8: 30 to PM-17: 30)
Mobile phone: 18918462396 (WeChat same number 24-hour service)
QQ: 2030185432
Email: kunage@126.com
Receive customer purchase list, provide customers with valve model selection and quotation (price list).
Specific agreement: delivery time, special requirements, etc.
download Google:
Customers have special requirements for products, and must provide the following instructions in the order contract:
(1) Structure length;
(2) Connection form;
(3) Nominal diameter, full diameter, reduced diameter, pipe size;
(4) Operating medium, temperature and pressure range;
(5) Experiment, inspection standards and other requirements;
(6) Various driving devices can be configured in this field according to the special requirements of customers;
If the determined valve type and model are provided by the customer, the customer should correctly explain the meaning and requirements of its model, and sign the contract under the conditions that the supply and demand sides understand and agree.
∷
KUNAG
KUNAG
KUNAGE