Air management flowmeter MVC*Azbil sales

The necessary performance and function flowmeters for plant air consumption management are provided. It is a product designed after discussing with customers about the management of factory air.
Mass flow measurement
Carrying capacity necessary for consumption management
Low cost concept

The machine has a throttle mechanism, and the measuring principle is the same as that of the differential pressure flowmeter, such as orifice plate, nozzle and Venturi. The throttling mechanism adopts the elliptical nozzle developed by our company, which has a large number of actual results, and can realize high precision measurement through a short straight pipe section.
A multivariable sensor with high precision for differential pressure, pressure and temperature is used in the transmitter. The multivariable sensor compensates the detected process variables for accurate mass flow.
High precision mass flow measurement

Flowmeter used in factory management uses multivariable sensors to detect process changes, to calculate the necessary expansion compensation coefficient of gas, compression coefficient and other high-speed operations, and achieves the accuracy of 6550
Automatic range function

The differential pressure flowmeter calculates the differential pressure and needs to set the range of instantaneous flow according to the flow value and other fluid conditions. But factory air is almost not clear. Factory management uses flowmeters to store the maximum flow value of the actual flow even when the flow is not clear, and to automatically set the range of the automatic measurement function.
Wide flow range

Flowmeters for plant management have a large range ratio of 100:1 and can cover a wide range of flow measurement. Therefore, when choosing the caliber, as long as you choose the same caliber as the factory air distribution pipe, you do not need to care about the size of the flow.
Rich display function

The front LCD displays the instantaneous flow value, the accumulated flow value and the velocity value.
It can also display the pressure value of the multivariable sensor for compensating operation and can be used as a monitoring pressure gauge.
Flexibly corresponding to site setup conditions

It can be installed on the horizontal piping (top photo of page) - vertical piping (photo 1) of the factory air distribution system. In addition, the pipes of each production line of each building are laid on the upper part of 3-5m, which can be corresponded with the separated type (photo 2).
Vertical facing piping
Vertical facing piping (photo 1)
Separation type
Separation type (photo 2)
In addition, the flow path or throttling part adopts the structure which is not easy to produce adhesion and clogging, and the necessary upstream side straight pipe length only needs 0.5D, so it can be used in various settings.
Functions for energy saving activities

Cost display function
In the energy-saving activities of factory air, we often know from our customers that factory air is free to use. To address this issue, the function of estimating the amount of cost (yen or US dollars) required by setting factory air costs and showing how much the current flow will cost is carried out. By showing costs, we will promote the inspiring and educational activities of on-site operators.
Leak detection function
The leak detection function is the function of calculating the air leakage rate (%) of a factory according to the pressure in the pipe measured by a multivariable sensor. If the leakage rate is determined as the management benchmark value and exceeds the benchmark value, the patrol and anti-leakage measures can be implemented, and the tendency management can be realized without pressure gauge.

Professional manufacturing and professional services, KUNAG creates more value for you
Continuously improving the quality of services and keeping improving, "sincere service" is the eternal theme of KUNAG. Kunag strictly complies with the requirements of ISO9001-2000 quality system certification, strictly controls the quality and responsibilities to the people to ensure the healthy operation of production, sales and service. To strengthen communication with customers and to provide our customers with quality products and perfect service, we hereby make the following commitments:
Product Standards
Products are designed, manufactured, and inspected strictly in accordance with China\'s GB, HG standards, and US API standards. The hardness of the sealing surface meets the national requirements and the width exceeds the national standard.
pre-sale service
Product introduction, technical communication, non-standard product design, troubleshooting.
Sale service
Trustworthy contracts, guarantee timely delivery, and keep in touch with customers at any time.
For special or complex products, our factory arranges technicians to train and guide users on product use, troubleshooting, tuning and maintenance.
After sales service
The warranty period of Weitong products is 12 months from the factory, and the "three guarantees" service (return, replacement, repair) is implemented.
During the use of our products, our factory regularly organizes technical and inspection personnel to visit and solicit user feedback on product quality, use conditions, and improvement opinions in order to further improve product quality.
Quickly respond to customer complaints about product quality problems, and after-sales service personnel rushed to the scene within 24-36 hours (48 hours outside the province).
For after-sales service, users are required to fill in the quality feedback form after the service and make appraisal opinions, while improving Guardian\'s service quality.

Order process
Landline: 021-59718851 (AM-8: 30 to PM-17: 30)
Mobile phone: 18918462396 (WeChat same number 24-hour service)

QQ: 2030185432

Email: kunage@126.com
Receive customer purchase list, provide customers with valve model selection and quotation (price list).
Specific agreement: delivery time, special requirements, etc.
download Google:
Customers have special requirements for products, and must provide the following instructions in the order contract:
(1) Structure length;
(2) Connection form;
(3) Nominal diameter, full diameter, reduced diameter, pipe size;
(4) Operating medium, temperature and pressure range;
(5) Experiment, inspection standards and other requirements;
(6) Various driving devices can be configured in this field according to the special requirements of customers;
If the determined valve type and model are provided by the customer, the customer should correctly explain the meaning and requirements of its model, and sign the contract under the conditions that the supply and demand sides understand and agree.

Contact: Peng gong
Q Q: 2030185432
Mobile: 18918462396(WeChat same number - 24 hours service)
Landline: 021-59718851
E-mail :kunage@126.com

Azbil

Air management flowmeter MVC

RELATED PRODUCTS

CATEGORIES

LATEST NEWS

CONTACT US