Product name: Imported flange solenoid valve Product model: Buhrer
Drive method: electromagnetic connection: flange, thread
Structure: Piston type, Pilot type, Direct acting Seal structure: Soft seal, Hard seal
Pressure range: 1.6-100MPa Nominal diameter: DN1mm-500mm
Common materials: brass, WCB, 304, 316, etc.
Product introduction
The imported flange solenoid valve produced by Breer can be driven by electromagnetic, and can be connected by flange, thread, and piston type, pilot type, direct-acting type, and soft seal, hard seal, and pressure can be used as the sealing structure. The range is PN1.6-100MPa, the nominal diameter is DN1mm-500mmmm, and the material can be brass, WCB, 304,316, etc. Because the valve is used in a very wide range, the same valve has different combinations in different situations and working conditions.
Product Details
American Buhrer brand imported flange solenoid valve is used in aerospace, shipbuilding, petrochemical, industrial furnaces, boilers, water supply and drainage, heating and air conditioning, fire fighting equipment, drying equipment, food medical equipment, cleaning equipment, landscape sprinkler irrigation, water plants and other pipes And other low-pressure solenoid valve products in various fields. This product is a pilot-operated structure. The valve core is a stainless steel piston. The piston ring will not be stuck by impurities in the medium. It has high dynamic sealing performance and long life. There is no direct friction between the piston and the metal valve cavity. The installation direction of the valve body is unlimited. ; Dedicated coil, not easy to burn; Stop and restart for a long time, the action is also sensitive; Zero leakage; Service life is more than 1.5 million times.

A series of imported solenoid valves of the American Buhrer brand: direct-acting solenoid valves, step-wise direct-acting solenoid valves, medium-low pressure solenoid valves, high-pressure solenoid valves, ultra-high-pressure solenoid valves, ultra-high temperature solenoid valves, steam solenoid valves, low-temperature solenoid valves, Anti-corrosion solenoid valve, diving solenoid valve, gas solenoid valve, gas fast cut-off solenoid valve, new gas safety solenoid valve, vacuum solenoid valve, pulse solenoid valve, self-protection solenoid valve, two-position three-way solenoid valve, solenoid with manual function Valve, solenoid valve with signal function, etc.

Main technical parameters of imported flange solenoid valve:
Product specifications: DN1 ～ DN500
Body material: WCB, stainless steel, 304, 316, 316L, etc.
Applicable medium: gas, oil, steam, corrosive fluid, etc.
Temperature range: 0 ～ + 550 ℃
Protection performance: moisture-proof, explosion-proof (Exd IICT5), anti-corrosion
Wiring method: terminal block type; lead type, plug type
Control method: normally open, normally closed
Power supply voltage: DC24 ～ 127V; AC36 ～ 380V
Connection method: internal thread, flange (external thread and special interface can be customized or add adapter)
Working principle of imported flange solenoid valve:
Normally closed: When the coil is energized, the pilot valve core is closed, the pilot hole is opened, the valve upper chamber is depressurized, the piston is pushed by the pressure of the lower chamber medium, and the solenoid valve is opened; when the coil is powered off, the pilot valve core is restored by the spring, and the pilot valve is opened. The hole is closed, the upper cavity of the valve is pressurized by the piston orifice and the thrust of the return spring, and the solenoid valve is closed.
Normally open: When the coil is energized, the pilot hole is closed, the upper cavity of the valve is pressurized by the piston orifice and the thrust of the return spring, and the solenoid valve is closed. When the coil is de-energized, the pilot valve core is restored by the spring, the pilot hole is opened, the upper cavity of the valve is depressurized, the piston is pushed by the pressure of the lower cavity medium, and the solenoid valve is opened.

Order process
Landline: 021-59718851 (AM-8: 30 to PM-17: 30)
Mobile phone: 18918462396 (WeChat same number 24-hour service)

QQ: 2030185432

Email: kunage@126.com
Receive customer purchase list, provide customers with valve model selection and quotation (price list).
Specific agreement: delivery time, special requirements, etc.
download Google:
Customers have special requirements for products, and must provide the following instructions in the order contract:
(1) Structure length;
(2) Connection form;
(3) Nominal diameter, full diameter, reduced diameter, pipe size;
(4) Operating medium, temperature and pressure range;
(5) Experiment, inspection standards and other requirements;
(6) Various driving devices can be configured in this field according to the special requirements of customers;
If the determined valve type and model are provided by the customer, the customer should correctly explain the meaning and requirements of its model, and sign the contract under the conditions that the supply and demand sides understand and agree.