Product Name: Imported Soda Separator Product Model: Buhrer
Drive method: automatic Connection form: flange, thread
Structure: Vortex baffle Seal structure: Seal
Pressure range: 1.0MPa-6.4MPa Nominal diameter: DN15-300
Common materials: WCB, 304, 316, alloy steel, etc.
Product introduction
The imported soda-water separator produced by Blair can be driven automatically, flanged, threaded, and vortex baffle in the structure, and sealed in the sealed structure. The pressure range is PN1.0MPa-6.4MPa. DN15-300mm, WCB, 304,316, alloy steel, etc. Because the valve is used in a very wide range, the same valve has different combinations in different situations and working conditions.
Product Details
The Breer brand gas-water separator is used to protect expensive system components, such as turbines, and to isolate potential hazards such as moisture and particulates from air, water vapor, and gasoline. A wide variety of cast or assembled separators can meet the needs of different customers around the world.

Steam: Brel gas / liquid separators are often installed before steam turbines to protect turbine blades from wet steam, pipe scale, and other damaging entrained solids. Installation in steam distribution lines also ensures that clean, dry steam enters heat exchangers, pressure reducing valves, temperature regulators, meters, and other expensive processing equipment.

Compressed air: installing a Brel gas / liquid separator after the middle cooler or after the cooler can remove the entrained moisture, otherwise this humid gas will cause damage in the stage of continuous compression or subsequent processes. Separator is commonly used to remove destructive entrainment in the main air line of pneumatic chucks, nozzles, and spray equipment. They ensure the best equipment for long-term normal pipeline operation and can be used in areas with large temperature differences. The separator is also capable of efficiently separating moisture in a cold air dryer unit.

Compressed gas: Brel gas / liquid separators are often installed with intermediate cooler and after cooler equipment to remove oil, tar, water and other destructive entrainments particularly effectively.

Working principle of gas-liquid separator
Through the five-stage separation-speed reduction, centrifugation, collision, change of direction, coagulation and other principles, the liquid water and solid particles in compressed air (gas) are removed to achieve purification. After the moisture is condensed in the cooling process, the baffle in the separator changes the direction of the gas twice and rotates at the designed speed to generate centrifugal force to efficiently separate the liquid and particles. The drain should discharge the condensate in time .
Product features of gas-liquid separator
1. High water removal efficiency: 99% of liquid water and oil can be removed.
2. Small size and light weight.
3. Convenient installation, pipeline connection and hanging installation.
4. Maintenance-free and good reliability.
5. Manufactured at 1.6-2.5MPa rated pressure, safe and reliable.
Application range of gas-water separator
1. Separation and recovery of compressed air condensate
2. Condensate separation in steam pipeline
3. Separating inlet and outlet of gas-liquid mixing part
4. Separation and discharge of condensate in vacuum system
5.Condensate separation after water cooling tower
6. Geothermal steam separator
7. Other gas-liquid separation applications
The above technical parameters are standard product parameters. The actual technical parameters should be based on customer technical requirements.

Order process
Landline: 021-59718851 (AM-8: 30 to PM-17: 30)
Mobile phone: 18918462396 (WeChat same number 24-hour service)

QQ: 2030185432

Email: kunage@126.com
Receive customer purchase list, provide customers with valve model selection and quotation (price list).
Specific agreement: delivery time, special requirements, etc.
download Google:
Customers have special requirements for products, and must provide the following instructions in the order contract:
(1) Structure length;
(2) Connection form;
(3) Nominal diameter, full diameter, reduced diameter, pipe size;
(4) Operating medium, temperature and pressure range;
(5) Experiment, inspection standards and other requirements;
(6) Various driving devices can be configured in this field according to the special requirements of customers;
If the determined valve type and model are provided by the customer, the customer should correctly explain the meaning and requirements of its model, and sign the contract under the conditions that the supply and demand sides understand and agree.