Industry new

Life test of solenoid valve

How to measure the life test of the solenoid valve
The following 4 situations impede the normal operation and shorten life of solenoid valves.
1. Changes in the medium during use
2, take over the internal rust
3, the air compressor oil oxidation, producing carbon particles, tar and other sundries, mixed into the pipeline.
4. There are dust particles and dirt in the pipe
At present, a solenoid valve life test stand can be supplied to solve the problem for you.
Technical performance and indicators:
1. The water valve can be set at 12bar constant pressure and hot water with a maximum temperature of 90 degrees. According to different types of water valve on-off requirements (such as 5S pass 5S break for once) to carry out the test, the number of continuous tests about 50 thousand times (set).
2. The test bench can automatically record the condition of the water valve coil breakage, and it can record the stop time, but it will not affect the work of other water valves.
(3) the test bench can meet 10 water valves at the same time.
The accuracy of pressure control is + 0.2bar, and the accuracy of water temperature control is + 1.
The voltage of the solenoid valve is adjustable (12~300V).
It can be used as a test for low voltage off performance

PREVIOUS：Vacuum solenoid valve sealing materialNEXT：Analysis of the solenoid valve industry