Method of improving the service life of micro vacuum pump

We all know that no matter what the product, there will be a certain limit, we can protect it through maintenance to ensure that it has increased in service life, then how can we improve the number of life of the mini vacuum pump when we use it?
1, reducing the influence of temperature
In the process of application of engineering machinery, one must prevent overloading at low temperature, so that the machinery can arrive at the specified temperature and proceed to work or work. Do not ignore its main function because of the time without doubt. Two to prevent the machinery from working at high temperature. In the process of mechanical work, the values of various thermometers must be checked. They immediately shut down the machine to check and find out the shortcomings. In the past, we should pay attention to check the working conditions of the cooling system, check the water cooling machinery, add the cooling water, and keep the air cooling system, and keep the dust on the air cooling system, and ensure the dust on the air cooling system. The cooling air duct is dredged.
2, reduce the effect of mechanical impurities
For engineering machinery working in a bad environment and disorderly situation, one should use high quality, auxiliary parts and lubricating oil and grease to block the source of harmful impurities. Two it is necessary to do a good job of mechanical protection at the work site, to ensure that the corresponding organization can work normally and prevent all kinds of impurities entering the vacuum pump machinery. The Department, to the defects of the machinery, as far as possible to the standard repair occasions to repair, site repair, also to do a good way to protect the site from the repair of replacement parts before entering the machine and other impurities such as dust pollution.
3, reduce various kinds of corrosion
The appearance of the metal surface which is damaged by chemical or electrochemical action with the surrounding medium is called corrosion. This corrosive action will not only affect the normal operation of the mechanical surface equipment, but also corrode the parts inside the vacuum pump. Such as rain, the chemical substances in the air and so on through the mechanical parts of the external channel into the internal machinery, corrosion mechanical parts inside, accelerating mechanical wear, because of this corrosion is sometimes invisible, can not be touched, simply ignored, and thus more harmful. In the application, the handling and operating personnel should use the useful methods to reduce the effect of chemical corrosion to the machinery according to the local weather conditions and air pollution, mainly to prevent the invasion of the chemical components from the rain and the air.
4. Ensure normal working load
The size and properties of the working load of the construction machinery have a major influence on the loss process of the vacuum pump. Generally, the wear and tear of the parts increase proportionately with the increase of the load. When the load is higher than the uniform load, the wear will increase. At the same time, the stable load is more stable than the dynamic load. Lower wear and fewer defects.
In addition, the most direct way to improve the life of micro vacuum pump is to start with the raw materials, processing technology and technology. Through the essential improvement of it, the use of trust will be more useful. Then, through the above methods of improving the number of life, we hope that every user can be more attentive when it is used.