News

Gas mass flow controller brings you to know high temperature vortex flowmeter

There are many types of flowmeters such as: electromagnetic flowmeters, differential pressure flowmeters, street flowmeters, and ultrasonic flowmeters; and each flowmeter has its own installation method and precautions. Today's gas mass flow controllers To talk to everyone about the high temperature vortex flowmeter installation precautions;
First, the requirements of the installation location, vortex flowmeter sensor installed in the insulation layer on the pipeline should pay attention to the measurement of high-temperature steam, the insulation layer can not exceed one-third of the height of the bracket.
Second, the installation site needs to avoid strong electrical equipment, high-frequency equipment, strong power switch equipment; avoid the impact of high temperature heat source and radiation source, avoid strong vibration and strong corrosion environment, etc., at the same time to consider the installation and maintenance.
Third, the pipeline to take vibration reduction measures. The sensor should not be installed on the vibrating pipeline as much as possible, especially the lateral vibration. If it is necessary to install, vibration reduction measures must be taken. Pipe fastening devices are installed at the upstream and downstream 2D of the sensor, and anti-vibration pads are added.
Fourth, usually when installing anything, it is necessary to ensure the cleanliness of the installed items, before installing the vortex flowmeter sensor, the pipeline must be cleaned. Drain the impurities in the tube to avoid blocking the sensor after passing through the flow. The pipe for measuring liquid must be filled with the liquid to be measured to prevent air bubbles from interfering.

PREVIOUS：Do you know what the gas mass flow controllerNEXT：Gas flow controller Xiao Bian tell you electr