The main features and application of Baode angle valve in the application

The Cape Verde valve is an angle stop valve. The Bowdard valve is similar to a ball valve. Its structure and characteristics are corrected by the ball valve. The difference from a ball valve is that the outlet of the angle valve is at a right angle to the inlet at 90 degrees. Angle valves are also called triangle valves, angle valves, and angled water valves. This is because the pipe has a 90-degree corner shape at the angle valve, so it is called an angle valve, an angle valve, and a chamfer water valve. Baode angle valve application range: printing and dyeing textile, gas industry, foam plastic machinery, drying equipment, chemical industry, water treatment, food, medical, etc. Features of Baode angle valve: 1. Long life valve stem: for extending life, valve stem All are made of stainless steel 316/stainless steel 316L (ARES) and sealed with a Teflon (PTFE) seal. The valve stem automatically corrects position, self-lubricating and maintenance-free. 2. Advanced pneumatic actuator: engineering plastic shell, low-friction brass nickel-plated piston, internal components are automatically lubricated, maintenance-free, 360° rotation, and connected to the solenoid valve as NAMOR interface, divided into normally closed and normally open. 3. Unique fixed piston seal: Extend the valve stem stroke to make the valve cavity more gentle, enlarge the flow cross section of the valve cavity and increase the flow rate by 30%. 4. Large flow valve body: more reasonable valve cavity design, reducing fluid resistance, combined. Increase the stroke of the valve stem, the flow rate increased by 30%. Life expectancy is as high as 2-7 million times. Baode angle valve features: 1. Compact structure and light weight. 2. Advanced pilot cylinders. 3. The valve head is detachable and easy to maintain. 4. The tracheal interface can be rotated 360 degrees. 5.4Mpa water pressure factory inspection, users are more assured. 6. Large flow, low resistance, no water hammer. 7. Long service life and maintenance-free sealing. 8. Visual position indication, can be connected to limit switch or emergency manual device. The use of Baode angle valve: 1. The main purpose of civil Baode angle valve: a. Transfer the inner and outer water outlets; b. The water pressure is too large, it can be adjusted above the triangle valve, close small; c. If the faucet leaks and other phenomena occur, the triangle valve can be turned off, and it is not necessary to close the main valve in the home; d. Beautiful and generous. Therefore, the general new house decoration is an essential plumbing fitting, so the designer will also mention it when decorating the new house. 2, the main purpose of industrial Baode angle valve: a. Of course, the angle valve is constantly improving, although there are still three mouths, but there are angle valves that are not angled. b. The valve body of the angle valve has three inlets, a water quantity control port and a water outlet port, so it is called a triangle valve. c. Industrial angle valve: The angle control valve is similar to the straight-through single-seat control valve except that the valve body is at right angles.