Industry new

Attention to the selection of quick joint

Stainless steel ball valves are usually made of nitrile and 5 sealing material: O ring material that represents the sealing parts of the mold quick joint. There is a total use of fluoro rubber ring (200 degrees of resistance to high temperature)

Attention to the selection of quick joint for stainless steel pipe fittings:

1 shape and size of stainless steel quick connector: select quick connector suitable for pipe shape and size.

2 types of liquids in stainless steel pipe fittings factory: select the main data suitable for fluid and quick joint of sealing ring material.

3 stainless steel live connection and environment: choose suitable material and structure quick connector according to the environment.

4 liquid temperature: choose the sealing material suitable for fluid temperature when selecting the connector.

A fast joint for the resistance to pressure of stainless steel. 5 fluid pressure: the choice is suitable for fluid pressure.

6 valve structure: select valve structure suitable for pipe use. With valves (closed) without valves (open).

The terminology of the quick joint shows:

1 information: material that represents the female joint and the male joint of the production mould quick connector.

The allowable range of pressure. 2 pressure: indicated in the use of a quick die joint.
It
3 temperature: the highest temperature and minimum temperature for the O ring material used for the mold quick connector.

In case the head and the head are separated, the fluid in the pipe will not flow out. 4 automatic opening and closing: the structure that automatically switches the valve when connecting. Open - that is, there is no valve structure for the female head and the male head; the closed type means that the female head and the head have valve structures.

PREVIOUS：A brief introduction to the material and typeNEXT：Brief introduction of inert gas for rapid joi