Industry new

Electromagnetic stainless steel is driven through the solenoid

Electromagnetic stainless steel: For switch control of liquid and gas lines, two DO controls. It is generally used for the control of small pipes.
Electromagnetic stainless steel: can only be used as a switch, DO control, can only be used for small pipe control, common in DN50 and the following pipeline, there is little up.
1. Switch type: Electromagnetic stainless steel is driven by the coil and can only be turned on or off. The switching time is short. The
2. Nature of work: The general circulation coefficient of electromagnetic stainless steel is very small, and the working pressure difference is very small. For example, the general 25-bore electromagnetic stainless steel has a much smaller circulation coefficient than the 15-diameter electric ball stainless steel. Electromagnetic stainless steel is driven by electromagnetic coils and is easily damaged by voltage surges. The equivalent of the switch is to open and close 2 roles. Electromagnetic stainless steel generally can be reset when the power is off, electric stainless steel to such a function needs to add a reset device.
3. Applicable process: Electromagnetic stainless steel is suitable for some special process requirements, such as leakage, special fluid medium, etc., which is more expensive.

PREVIOUS：What is the path of electromagnetic stainlessNEXT：Electromagnetic stainless steel test standard