Industry new

What is the path of electromagnetic stainless steel?

Electromagnetic stainless steel is used in the hydraulic system to realize the change of the fluid circuit or the flow direction. It generally has a spool that can slide under the electromagnetic force of the coil. When the valve core is in different positions, the electromagnetic stainless steel path It's different. There are several working positions of the valve core. The electromagnetic stainless steel is called several electromagnetic stainless steel: the interface on the valve body, that is, the number of electromagnetic stainless steel channels, there are several access ports, the electromagnetic stainless steel is called several electromagnetic stainless steel.
After the electromagnetic stainless steel is installed, all the interfaces are generally connected. The so-called working position refers to the position of the spool. The spool is in position A when the coil is not energized and is in position B when the coil is energized. When the spool is in a different position, it acts as a connection or closure for each interface.
Electromagnetic stainless steel two-position refers to the electromagnetic stainless steel spool has two different working positions (open, close).
Electromagnetic stainless steel two-way, three-way electromagnetic stainless steel valve body has two, three channel mouth; for example, two two-way electromagnetic stainless steel is one in and one out (two channels, the most common common) two three-way electromagnetic stainless steel The control fluid is one in and two out (two out are one normally open and one normally closed); the pneumatic commutation electromagnetic stainless steel is one in, one out and one exhaust, and the hydraulic one in and out one oil.

PREVIOUS：Electromagnetic stainless steel flow meter meNEXT：Electromagnetic stainless steel is driven thr