Description of solenoid valves for fuel cell technology

Application: Drain valve
The moisture in the fuel cell can be removed, whether it is a fuel cell in a car or a fuel cell at a gas station.
Application: Circulation valve
It can be used as a circulation valve for fuel cells, whether it is a fuel cell in a car or a fuel cell at a gas station.
■ Back pressure protection
■ No pressure difference required

design

A valve or valve block can be used. When using a valve, it can be installed directly on the pipe. When using a valve block, two or more discharge valves should be combined before being installed on the pipe.

Features:

■ Suitable for deionized water, hydrogen, air and corrosive media because of the isolation diaphragm
■ Because the plastic valve body is used, the valve is lighter in weight
■ The power supply voltage can be designed according to the user's requirements.
■ Can provide electrical interfaces that comply with relevant automotive standards
■ The valve block structure reduces the interface
■ Very low leak rate