Industry new

Turbine flow sensor maintenance and maintenance instructions

Turbine flowmeters are a major class of impeller-type flowmeters that use a multi-blade rotor to sense the flow rate of the fluid to derive flow or total volume. Shanghai Anzhen is a professional manufacturer of flowmeters. As a commonly used industrial instrument, turbine flowmeter is widely used in petroleum, chemical, scientific research, national defense and other departments.
The maintenance of the turbine flow sensor section should pay attention to the following points:
1. When using, keep the measured medium clean and free of impurities such as fibers and particles.
2. When the turbine flow sensor starts to use, it should first slowly fill the sensor with the medium, then open the outlet valve (the valve should be installed at the back end of the flowmeter). It is forbidden to be impacted by the high-speed fluid when the sensor is in the mediumless state.
3. The maintenance period of the turbine flow sensor is generally half a year. When cleaning and cleaning, please be careful not to damage the parts inside the measuring chamber, especially the impeller. Please be optimistic about the positional relationship between the guide and the impeller during assembly.
4. When the turbine flow sensor is not in use, the internal medium should be cleaned, and after drying, a protective cover is added at both ends of the sensor to prevent dust from entering, and then stored in a dry place.
5. The used filter should be cleaned regularly. When not in use, the internal medium should be cleaned. As with the sensor, add a dust jacket and store it in a dry place.
6. Before the sensor is installed, use the mouth to blow or hand the impeller to make it rotate quickly to see if there is any display. Install the sensor when there is any display. If there is no display, check the relevant parts and troubleshoot.
Turbine flowmeter is optimized for the advanced technology of flow meter at home and abroad. It has the characteristics of simple structure and sensitive reaction. It is an indispensable flow meter in industrial production.

PREVIOUS：How to correctly select the material descriptNEXT：Turbine flowmeter fault rapid processing intr