Industry new

Introduction to the selection of compressed air flowmeters

In industrial production, we need to use all kinds of instrumentation, so how do we choose so many instrumentation in use? Let Xiaobian introduce the selection technique of compressed air flowmeter today. :
Selection of compressed air flowmeters:
First of all, we must pay attention to product selection, and put product selection in the first place. We know that the flow of compressed air can generally meet the flow range requirements of the flowmeter.
The main points are as follows:
1. Whether the on-site pipeline installation conditions meet the requirements;
2. Whether there is signal interference at the scene;
3. The power line of the on-site flowmeter should not be shared with a high-power device or take a line slot;
4. User requirements for flowmeter configuration, power supply requirements.
How to choose the correct air flow meter correctly: Secondly, pay attention to the correct installation of the flow meter, as far as possible to meet the requirements of the straight pipe of the flow meter, install it as horizontally as possible, and note that the inner diameter of the flow meter should correspond to the inner diameter of the pipe. The snails should be fully tightened, and there should be no dripping. Pay attention to the correct wiring of the instrument. If it is in the open air, take measures against rain and sun protection to protect the compressed air flow meter.
Finally, the quality of compressed air flowmeters is also the key. Only good products can play an accurate measurement role, so that there will be no essential faults.

PREVIOUS：How to analyze the on-site calibration of sewNEXT：Magnetic float level gauge composition and in