News

Festo product cylinder DSBC-32-100-PPSA-N3 Festo

Cylinder DSBC-32-100-PPSA-N3 Festo
The hole pattern on the right angle bracket mounts the valve according to the right angle of the dispense. The table below shows some of the available solenoid valves. Double earrings holder LNG/CRLNGaC Double earrings bearing LSN with spherical bearing aD Trunnion mounting assembly DAMT For mounting anywhere in the cylinder aA Spherical bearing SGS/CRSGS Spherical bearing aF Right angle double earrings LQGaG Double earrings SGA belt Externally threaded coupling KSG is used to supplement the radial deviation coupling KSZ for cylinders with torsion resistant piston rods. The compensation radial deviation double earrings SG/CRSG allows the cylinder to oscillate in a plane from the centering rod FK, CRFK is used to compensate for radial and angular deviations. All products, including spare parts such as parts/wear parts, should be mechanically deformed or damaged in a way that they are not, ie without buckling or sagging, no point load. The direct contact between the elastomers, the copper or manganese extension period should also be avoided as a result of the interaction. Warehouse management In order to avoid excessive aging of parts, the first principle should be followed first. The total storage time should be as short as possible. In principle, the prescribed warranty period applies.
Cylinder DSBC-32-100-PPSA-N3 Festo

All products, including spare parts, for example, parts/wear parts should be stored in a manner that they are not in the form of thermal deformation or damage, ie no buckling or drooping, no load. Direct contact between elastomers, copper or manganese In order to avoid excessive aging of parts, warehouse management should first follow the first principle.
Cylinder DSBC-32-100-PPSA-N3 Festo

PREVIOUS：Festo product ESNU-40-5-P-MA Festo cylinder 1NEXT：Festo DSBC-32-320-PPVA-N3 Festo 137643