Water use solenoid valve to reduce cost

Water solenoid valve
Installation of pipeline: manual function, save three manual valves, can be on-line maintenance, greatly reducing costs.
1. Medium viscosity can be adjusted. It can be used for gas, water and oil to facilitate purchase, storage, installation and maintenance.
2, valve opening and closing time adjustable: meet various requirements, effectively prevent water hammer damage.
3, the valve opening can be adjusted: the maximum and minimum opening can be preset to improve the accuracy of automatic control.
4, the main valve wear can be compensated: prolong the service life of the valve and undergo a long-term test.
5. Caliber: DN1-DN1200.
6, temperature: -196-450 C.
Structure principle
This valve cleverly combines the pilot solenoid valve, the manual valve and the throttle valve. The pilot valve takes the electrical signal switch to drive the main valve. The adjusting screw A and B can adjust the applicable range of medium viscosity and the main valve switching time, and can compensate the main valve after wearing. When the guide valve needs repair, it can be removed as long as the adjusting screw B and the isolation screw C are screwed up, and can be operated by manual screw. The screw can also be used to preset the maximum or minimum flow rate when the solenoid valve is automatically controlled.