Industry new

LD electromagnetic flowmeter - focus on microfluidic control technology

1. Nominal diameter (mm) DN10, 15, 20, 25, 32, 40, 50, 65, 80, 100 ... 2000
2,** Measurement flow rate 10m/s
3, accuracy table registration DN10, 15 and 700 ~ 2000 flow rate ≥ 1m / s ± 0.5% R flow rate <1m / s ± 3mm / s
DN200~DN600 Flow rate ≥1m/s ±0.3%R Flow rate <1m/s ±2mm/s
4, fluid conductivity ≥ 5μS/cm;
5, Nominal pressure DN10~DN50 4.0Pa; DN65~DN150 1.6MPa;
DN200~DN1000 1.0MPa; DN1200~DN2000 0.6MPa.
6. Signal output form 4~20mA current output, 1~5000Hz frequency output Pulse width 20ms pulse output
7. Lining material Polytetrafluoroethylene (PTFE) Neoprene Polyurethane
Polyfluoroethylene (F46) Polyvinyl Chloride (FS).
8, ** fluid temperature polytetrafluoroethylene (PTFE) split type 100 °C; special order 150 °C integrated 70 °C
Neoprene Split 70°C; Special Order 120°C Integral 70°C
Polyfluoroethylene (F46) Split Type 100°C; Integrated Type 70°C
Poly(vinyl chloride) (FS) Split 80°C; Integrated 70°C
Polyurethane Split Type 45°C; 80°C Indication When Ordering Integrated Type 70°C
9. Electrode material Stainless steel, 0Cr18Ni12Mo2Ti, Hastelloy B (Hb), Hastelloy (CHc),
Titanium (Ta), Tantalum (Ta), Platinum/Iridium (Pa)
10, shell protection grade IP65, IP68
11, explosion-proof grade ExdllBT4
12, power supply voltage 220VAC 50Hz; 24VDC
13, split type The distance between the sensor and the converter is generally not more than 100m.

PREVIOUS：Status and Development Trends of Level Meter NEXT：FXLWQ Gas Turbine Flowmeter - Focus on Microf