Industry new
Maintenance of pneumatic switch ball valve and its advantages
Pneumatic switch ball valve is a type of technology with a relatively high technological content among ball valves. Most companies use pneumatic switch ball valves. Pneumatic switch ball valves have emerged in a variety of companies, such as oil extraction, including some chemical companies and paper mills that use pneumatic switch ball valves.
At present, China's ball valve market is very broad, and the demand for pneumatic switch ball valves from national companies is very high. The main switch ball valve can be used for draining and storing water, so companies with large fluid media need to use pneumatic switch ball valves. Pneumatic switch ball valve realizes industrial automation. The power used by the entire ball valve is air pressure, which saves a lot of power resources.
First, maintenance of pneumatic switch ball valve
Pneumatic switch ball valves have a very important role in industrial production, so maintenance and renewal are also necessary tasks, and the frequency of repairs and updates is higher to ensure the effective operation of pneumatic switch ball valves. Before the demolition of the pneumatic switch ball valve, it is necessary to ensure that the pressure on the ball valve has been removed. If the pressure is not removed directly disassemble the ball valve of the pneumatic switch will cause personnel casualties and fluid leakage, resulting in irreparable losses.
Followed by the non-metallic parts of the pneumatic switch ball valve cleaning, non-metallic parts should be cleaned with cleaning products, but can not be soaked in the cleaning product for a long time, the metal parts can be wiped clean with a rag. The parts can be installed after they are dry, and the parts must be tightened during installation so that they will not affect the future work.
When choosing a cleaning product, it must be noted that cleaning products that can corrode natural rubber and plastic parts cannot be selected because the pneumatic switch ball valve has natural rubber and plastic on the housing. Another point must be noted. Many operators will think that the newly purchased pneumatic switch ball valve does not require cleaning, in fact, this is a wrong way of use, the new purchase of parts also need to be cleaned, because the pneumatic switch ball valve parts can not have dust and metal powder And other residual substances.
During the process of dismantling, special disassembly tools must be used. It is not possible to remove the parts directly by hand. This may cause damage to the parts.
Second, the advantages of pneumatic switch ball valve
Pneumatic switch ball valve has the advantages of small fluid resistance and strong sealability, especially in terms of operation, the operator can easily grasp the operation method. And pneumatic switch ball valve work is very efficient, only takes a few seconds to start and close.
∷
KUNAG
KUNAG
KUNAGE