Industry new
How to operate the valve with drive device for pneumatic high pressure ball valve
When our valves are installed, the relevant operators should familiarize themselves with the drive of the corresponding valves and be able to correctly recognize the direction and signals of the valves, so that they can quickly and accurately Pneumatic high-pressure ball valves are operated and adjusted to replace the packings and gaskets in the correct way, which can accurately deal with various emergent problems. The correct operation of the valve will have a direct impact on the service life of the valve. At the same time, it will also affect the safe production of equipment and devices and the safety of the system during the entire production process. The following is a brief explanation of the operation of the valve drive:
Valves with drive devices are not valves that are opened and closed by hand. They are generally operated by electromagnetic liquid and other energy sources. This requires the operator of the pneumatic high pressure ball valve to have a comprehensive understanding of the various structures and principles of the valve, and ultimately be able to perform independent operations and the ability to handle faults that occur.
First, the operation of the electric device valve
When the electric device is in use, the corresponding start button should be pressed by hand, and the random motor starts. According to the built-in program, the electric door will automatically close after reaching a certain time, and the opened model will flash, when the valve is closed. , it should press the corresponding close button, when the valve works for a certain time the valve will be fully closed, this time the button will turn off. In addition, during the normal operation of the valve, the corresponding indicator lights that are turning on and turning off will also make corresponding prompts. If the signal light is normal and work, and the switch can be normally opened, the electric device is working properly. If the electric device is turned off and on is incomplete, it needs to be processed in time.
Second, pneumatic and hydraulic valve operation
Pneumatic high-pressure ball valve pneumatic and hydraulic valve device operation is not normal can be directly from the corresponding valve member at the upper and lower position to judge and feedback on the dashboard above the signal to reflect; In addition, the addition of pneumatic valve does not close the strict, The problem can be solved by adjusting the nut at the bottom of the cylinder so that the nut goes down. If a malfunction occurs in a pneumatic or hydraulic valve, the valve must be closed or opened in a timely manner. This process needs to be performed manually.
∷
KUNAG
KUNAG
KUNAGE