Industry new

Water solenoid valve concept and working principle

There are sealed chambers in the water solenoid valve. There are through holes in different positions. Each hole leads to a different tubing. The middle of the chamber is a valve. On both sides are two electromagnets. Which side of the magnet coil energizes the valve body. Which side is attracted to, by controlling the movement of the valve body to block or leak out different oil discharge holes, and the oil inlet hole is normally open, the hydraulic oil will enter different drain pipes, and then pushed through the oil pressure The piston of the cylinder, the piston also drives the piston rod, and the piston rod drives the mechanical device to move. This controls the mechanical motion by controlling the electromagnet current. ZCS water solenoid valve is suitable for water or liquid as the working medium, can be automatically controlled or protozoa control of water, oil, liquid and other work medium pipelines on and off. Because this valve adopts rubber seal, the cleaning of the working medium is greatly reduced, and it has the characteristics of rapid opening and closing and reliability.

PREVIOUS：What is a magnetic material? What are the claNEXT：Ten Features of Extraction Flue Check Valve