Description of the eight characteristics of pneumatic stainless steel angle seat valve

The characteristics of the pneumatic stainless steel angle seat valve are as follows:
1, easy to install: the pneumatic head can be rotated 360 o. One to two limit switches can be easily installed.
2, advanced pneumatic controller: thickened engineering plastic shell, safe and reliable. Low-wear piston structure with large capacity and low air consumption. Internal components are self-lubricating and maintenance free.
3, with a variety of control methods: normally open, normally closed, double action.
4. A smaller pneumatic actuator is required: a smaller control head can be selected when fluid flows in from above the valve stem.
5, easy to connect: MAMUR standard connection, embedded metal joints.
6, long life guide: valve stem Teflon (PTFE) seal, to avoid the introduction of stolen goods. Self-lubricating, maintenance free. The stem is specially treated to ensure optimum fixation and to automatically correct position.
7. No water hammer action, when the fluid flows in from below the valve stem, the water hammer (water impact force) is absorbed.
8. Advanced valve body mechanism: the flow rate is 30% larger than the ordinary angle seat, the volume is smaller, and the fluid flow state is better. Stainless steel 316 valve body, Teflon seal, high temperature resistance, corrosion resistance. Life expectancy is up to seven million times.