Introduction to the Recommendation of Adding Support Protection to Electric High Temperature Regulating Valve

Electric high temperature control valve has its own characteristics, but there are many undeveloped projects that have not been applied to electric high temperature control valve. These projects are under development and research. It will pack the stem tightly and cause a large backlash. It causes mechanical damage and shortens the life of the valve. Now the better way is to use special butterfly valve for water treatment.
Electric High Temperature Regulating Valve
In special cases can be skewed, such as skewed point of view is very large or the valve itself is too heavy when the valve should add support protection. Clean up dirt and welding slag. After installation, in order to ensure that impurities do not remain in the valve body, the electric high temperature control valve should be cleaned again, that is, all valves should be opened when entering the medium to avoid impurities blocking.

The configuration and composition of the electric high temperature control valve system are flexible and changeable, and it has strong applicability. Therefore, the electric high temperature control valve can use shielded twisted pair or low-cost unshielded three-wire cable to communicate within the system. Electric high temperature control valve can take away some dirty medium by using the pressure of air source. This is very useful for the safety improvement of electric high temperature control valve in pipeline.