Pulse solenoid valve cleaning principle introduction

The electromagnetic pulse valve is a cleaning product on the pulse bag type dust collector. It is installed at the interface of the dust extraction and blowing pipe. As a blowing switch of the compressed air, it is controlled by the electric signal of the pulse blowing control instrument, and the dust filter bag is sprayed one by one. After the instantaneous release of compressed air becomes several times of the original air, the dust attached to the surface of the filter bag can be blown off in a short time.

The pulse solenoid valve is a diaphragm valve, which has the characteristics of long service life and high cleaning efficiency. It outlines the principle of cleaning the pulse solenoid valve: the diaphragm divides the pulse valve into two front and rear air chambers, when the compressed air is turned on, The compressed air enters the rear air chamber through the orifice. At this time, the air chamber pressure closes the diaphragm to the output port of the valve, and the pulse valve is in the "closed" state. The electric signal of the pulse controller makes the armature of the electromagnetic pulse valve move, the vent hole of the air chamber is opened after the valve, the vocal cord of the rear air chamber is out of pressure, the diaphragm moves backward, the compressed air can be blown through the valve output port, and the pulse valve is “opened”. status. The compressed air is instantaneously ejected from the valve to form a blowing air stream.

Right-angle electromagnetic pulse valve, submerged electromagnetic pulse valve, straight-through electromagnetic pulse valve and quick-connect electromagnetic pulse valve are suitable for cleaning all kinds of pulse bag type dust collectors. It can keep the airflow of the dust removal pipe unobstructed and keep the resistance of the dust collector. Within the set range, to ensure the processing capacity and dust collection efficiency of the dust collector.