Introduction to the Characteristics of CAMOZZI Magnetic Switch in Comosheng, Italy

Kangmaosheng CAMOZZI magnetic switch means induction through magnet. This "magnet" is magnet. There are several kinds of magnets. The commonly used magnets on the market are rubber magnet, permanent magnet ferrite, sintered Nd-Fe-B and so on. The switch is the reed. Dry reed tube is short for dry tongue reed tube. It is a passive electronic switch element with contacts. It has the advantages of simple structure, small size and easy control. Its outer shell is usually a sealed glass tube, which contains two elastic reed plates of iron and is filled with an inert gas called metal rhodium.

Usually, the two reeds made of special materials in the glass tube are separated. When the magnetic material is near the glass tube, under the action of the magnetic field force line, the two reeds in the tube are magnetized and attracted to each other. The reeds will be sucked together to connect the circuits connected by the nodes. When the external magnetic force disappears, the two reeds are separated because of their elasticity, and the circuit is disconnected.

Therefore, as a circuit switching device controlled by magnetic field signal, the reed tube can be used as a sensor for counting, limiting and so on (mainly used in the production of door and window magnets in security system), and also widely used in various communication equipment. In practice, permanent magnets are usually used to control whether the two metal plates are connected or not, so they are also called magnetrons.

Characteristic of CAMOZZI Magnetic Switch in Comosheng, Italy

Reed tube is also called magnetron. It is similar to Hall element, but its principle is different. It is a kind of switch element controlled by magnetic field signal. It has no magnetic disconnection and can be used to detect the state of circuit or mechanical movement.

Another kind of magnetic switch is the proximity switch, gate magnetic switch, also known as induction switch in the market. It has a dry open die and is a standard size plastic shell. It fills the reed tube in the black shell and leads out the wire. The other half of the plastic shell with magnet is fixed at the other end when the magnet is close to the plastic shell with conductor. When switching wire, send out switching signal! Generally, the signal distance is 10 mm. This product is widely used in anti-theft doors, household doors, printers, fax machines, telephones, and other electronic equipment.

Another kind of CAMOZZI magnetic switch is to set one or more magnetic reed switches in a closed metal or plastic pipe, and then run the pipe through one or more floating balls with annular magnets inside, and control the floating balls and reeds with fixed rings.

The switch makes the float float up and down in a certain range at the relevant position. The magnet in the float ball is used to attract the contacts of the reed switch and generate the action of opening and closing.

CAMOZZI switches provide nearly 150 series products in six categories: cylinders, solenoid valves and pneumatic valves, computer-controlled valves and hand-controlled valves, valve islands, filters, pressure relief valves and oil mists, electric-pneumatic regulators, air pipes and joints, vacuum suckers, vacuum/pressure switches.

CAMOZZI offers nearly 150 series products in six categories: cylinder, solenoid and pneumatic valves, computer and manual valves, valve islands, filters, pressure relief valves and oil mists, electric-pneumatic regulators, air pipes and joints, vacuum suckers, vacuum/pressure switches, solenoid magnetic switches, which means induction through magnets. "Magnets" are magnets. There are several kinds of magnets. The commonly used magnets on the market are rubber magnets, permanent magnet ferrites, sintered NdFeB, etc. The switch is the reed.  Dry reed tube is short for dry tongue reed tube. It is a passive electronic switch element with contacts. It has the advantages of simple structure, small size and easy control. Its outer shell is usually a sealed glass tube, which contains two elastic reed plates of iron and is filled with an inert gas called metal rhodium.

Usually, the two reeds made of special materials in the glass tube are separated.  When the magnetic material is near the glass tube, under the action of the magnetic field force line, the two reeds in the tube are magnetized and attracted to each other. The reeds will be sucked together to connect the circuits connected by the nodes. When the external magnetic force disappears, the two reeds are separated because of their elasticity, and the circuit is disconnected.

Therefore, as a circuit switching device controlled by magnetic field signal, the reed tube can be used as a sensor for counting, limiting and so on (mainly used in the production of door and window magnets in security system), and also widely used in various communication equipment. In practice, permanent magnets are usually used to control whether the two metal plates are connected or not, so they are also called magnetrons.

Reed tube is also called magnetron. It is similar to Hall element, but its principle is different. It is a kind of switch element controlled by magnetic field signal. It has no magnetic disconnection and can be used to detect the state of circuit or mechanical movement.

Another kind of magnetic switch is the proximity switch, gate magnetic switch, also known as induction switch in the market. It has a dry open die and is a standard size plastic shell. It fills the reed tube in the black shell and leads out the wire. The other half of the plastic shell with magnet is fixed at the other end when the magnet is close to the plastic shell with conductor. When switching wire, send out switching signal! Generally, the signal distance is 10 mm. This product is widely used in anti-theft doors, household doors, printers, fax machines, telephones, and other electronic equipment.

Another kind of magnetic switch is to set one or more magnetic reed switches in a closed metal or plastic pipe, then to run the pipe through one or more floating balls with annular magnets in the hollow, and to control the floating balls and magnetic reeds by means of fixed rings.