Introduction to Technical Parameters of CAMOZZI Computer Control Valve and Kangmaosheng Computer Control Valve

Detailed information on technical parameters of CAMOZZI and Kangmaosheng computer-controlled valves are summarized.

Work stress = 0

10 bar

Nominal flow = 500 Nl/min

Driving force = 70 N (under 6 bar working pressure)

Series 1 and 3 computer-controlled valves with two-position tee and two-position tee

There are three driving modes for two functions of bitwise five-way connection: column

Axis Drive, Ball Lever Drive and One-way Ball Lever

Drive; reset form is mechanical spring reset.

Structural form cut-off type (Series 1), slide valve type (Series 3)

Valve position function: two-position three-way, two-position five-way

Material aluminium body, brass lifting spool, stainless steel sliding spool, nitrile rubber seals



Overview of CAMOZZI computer-controlled valve and technical parameters of Kangmaosheng computer-controlled valve

Interface G1/8 - G1/4

Ambient temperature 0; 60C

Medium temperature 0; 50C

The working pressure is shown in the technical parameters of the relevant models.

The compressed air filtered by the medium does not need oil mist lubrication.

If oil mist lubrication is used, oil mist lubrication should be used uninterruptedly (ISO VG32 lubricant is recommended)

For 3 Series Two-Bit Three-way Monostatic Computer Control

Valve, when pressure is supplied to one mouth, its function is normally closed.

(NC); When three mouths are supplied with pressure, their function is normal.

Open type (NO). Two ports are always working ports.