Pneumatic solenoid valve maintenance method introduction

Pneumatic solenoid valve daily maintenance

Pneumatic solenoid valves have better performance, lower failure rate than other types of solenoid valves, and a wide range of applications. Therefore, among the many valves of Xiamen dry ball products, the sales of pneumatic solenoid valves account for a certain proportion. But the mechanical class is made by the students.

The physical reasons for the material produced make the pneumatic solenoid valve more prone to various failure problems in the case of long-term use.

The main maintenance points of pneumatic solenoid valve are as follows:

1. Regularly disassemble and clean the internal pneumatic impurities, and check whether the various parts of the pneumatic solenoid valve are seriously worn, and consider replacing or repairing damaged parts according to actual conditions.

2. When disassembling the pneumatic solenoid valve, first install the power supply and close the connection, and pay attention to the installation sequence of the various components of the solenoid valve during the disassembly process.

3. Pneumatic solenoid valves are prone to faults. There are mainly vulnerable parts such as coils and seals. The coils are burnt due to overloading, and the seals are consumables themselves, mostly due to long-term work. Caused by natural wear and tear.

4. When the pneumatic solenoid valve is working, if the vibration occurs frequently, it will easily cause damage to the pneumatic solenoid valve components. Therefore, the maintenance of the solenoid valve should also ensure the stability of the working environment, and periodically the pneumatic solenoid valve components.

Fix it, such as a nut bolt.

5. If the working environment of the pneumatic solenoid valve is open air, it may cause the rust of the pneumatic solenoid valve and parts to make the solenoid valve unable to work normally. Therefore, maintenance is required to ensure stable operation.

6. Under the permissible conditions, if the working position of the pneumatic solenoid valve is important, special maintenance personnel are required to ensure the working stability and low failure rate of the solenoid valve. This will make it more efficient, lower maintenance costs and longer life.