Two-way two-way direct-acting (normally closed) solenoid valve introduction

Body material: brass, stainless steel Interface: Thread 1/8" to 3/8"
Working pressure: 0~15bar Flow path: φ2.5～6mm
1. Applicable medium: liquid, gas, light oil (viscosity ≤ 20cst); ambient temperature: -10 ~ 65 ° C; working type: normally closed
2. Working voltage: AC220V DC24V Other voltages can be customized. Coil waterproof rating: iron shell IP54, plastic IP65; insulation grade: iron shell B grade, plastic seal H grade
3. Voltage fluctuation range: AC220 AC110 -15%~+10%, 36V or less (including 36V) is ±10%
4. Sealing material: nitrile rubber (NBR medium temperature -5～80°C)
Ethylene propylene diene monomer (EPDM medium temperature -10 ~ 130 ° C); fluoro rubber (VITON medium temperature -10 ~ 120 ° C); silicone rubber (VMQ -10 ~ 130 ° C)
5. Body material: copper and stainless steel SS316
Installation requirements: The flow direction of the medium is consistent with the flow direction of the arrow on the valve. When there is no arrow, “1” or “IN” is the inlet, and “2” or “OUT” is the outlet.