Threaded series two-way two-way zero differential (normally closed) solenoid valve introduction

Body material: brass, stainless steel Interface: thread 3/8" to 2"
Working pressure: 0~10bar Flow path: φ16～50mm
The two-way two-step step-by-step diaphragm solenoid valve is characterized by large flow and zero differential pressure start. Widely used for automatic control of pipeline fluids with zero differential pressure start.
Body material: forged brass, stainless steel SS304 available SS316
Ambient temperature: -10 to 65 ° C
Sealing material: nitrile rubber NBR (-5 ~ 80 ° C) Optional EPDM EPDM (medium temperature -10 ~ 130 ° C);
Fluororubber VITON (medium temperature -10 ~ 120 ° C); silicone rubber (VMQ medium temperature -10 ~ 130 ° C)
Working voltage: AC220V/110V 50/60Hz DC24V DC12V. Other voltages can be customized.
Voltage fluctuation: AC220V/110V -15%~+10% The voltage below 36V is allowed to fluctuate ±10%
Coil parameters: Waterproof rating: iron shell coil IP54 plastic coil IP65 insulation grade: iron shell coil B grade plastic coiled coil H grade
Optional: Time timing controller LED indicator junction box (only for plastic coil DIN43650A junction box configuration) ES low power coil (medium temperature must be within 80 °C)
DN10～25 can be equipped with standard steel flange