Two-way two-way (normally closed) water dispenser special solenoid valve introduction

Working medium: water, hot water
Medium temperature: 0 ~ 100 ° C
Working voltage: AC220V AC110V AC240V 50Hz/60Hz DC24V DC12V Other voltage can be customized
Voltage fluctuation: -15% to +10% above AC110V and ±10% fluctuation below 36V
Coil parameters: AC110V AC220V AC240V 7VA DC24V DC12V 5.5W IP54 Insulation class: Class B
Working type: RSC-1 RSC-2 is a direct-acting normally closed type (power off, power on)
RSC-8 RSC-10 RSC-12 is a diaphragm direct-acting type (normally closed type)
Sealing material: RSC-1 RSC-2 with EPDM rubber or silicone rubber (VMQ)
RSC-8 RSC-10 Silicone Rubber (VMQ) Diaphragm Diaphragm Structure for RSC-12
    RSC series solenoid valves are widely used in the automatic control of water inlet and outlet of water dispensers. Among them, RSC-1 and RSC-2 are mainly used for the control of water supply or hydration at the front end. The maximum pressure can reach 8bar, the minimum pressure can also be zero, and the wading parts are soft magnetic alloy and stainless steel SS304.
RSC-8~12 is a diaphragm type outlet valve with no differential pressure start, and all metal parts are isolated from the medium. You can choose any of these specifications based on the size of the traffic.