Two-position two-way bistable magnetic holding pulse solenoid valve introduction

Body material: brass, stainless steel, nylon Interface: thread 3/8" to 2"
Working pressure: 0.3~16bar Flow path: φ2～50mm
Working medium: liquid, water, gas, light oil (viscosity ≤ 20cst)
Medium temperature: -5 to 80 ° C Ambient temperature: -10 to 50 ° C
Sealing material: NBR (conventional) VITON or EPDM available
Working voltage: DC6V DC9V DC12V DC24V
Coil parameters: power 4W 6W 12W IP65 H class
Body material: forged brass, stainless steel SS316 reinforced nylon PA66
Valve port diameter: micro direct motion type 2 ~ 5mm, pilot type 10 ~ 50mm
When the non-energized state is in a closed state (ie, an initial state), the self-weight of the pilot valve movable iron core and the spring seal the pilot valve port to be in a closed state.
 When a path needs to be formed: the coil gives a forward DC pulse signal, the excitation circuit forms a magnetic field and generates a magnetic force, the movable iron core is attracted by the electromagnetic force, and the magnetic force of the permanent magnet inside the coil is de-energized, and the electromagnetic valve is opened.
To close the solenoid valve, turn the solenoid valve off by applying a DC reverse pulse signal to the coil.
When the disconnection is required, when the power supply is disconnected, the pilot valve port is closed, the spool diaphragm is closed by the downward pressure difference, and the main valve port is opened, and the solenoid valve is in an open state.