Description of the concept and working principle of water solenoid valve

The water solenoid valve has a closed cavity, and there are through holes at different positions. Each hole leads to a different oil pipe. The middle of the cavity is a valve. On both sides are two electromagnets. Which side of the magnet coil is energized? Which side is attracted to, by controlling the movement of the valve body to block or leak different oil drain holes, and the oil inlet hole is normally open, the hydraulic oil will enter different oil drain pipes, and then pushed by the pressure of the oil The piston of the cylinder, which in turn drives the piston rod, and the piston rod drives the mechanical device to move. This controls the mechanical motion by controlling the current of the electromagnet. ZCS water solenoid valve is suitable for working with water or liquid. It can control the flow of working medium such as water, oil and liquid by automatic control or protozoa. Since the valve is rubber-sealed, the cleaning of the working medium is greatly reduced, and the opening and closing is quick and reliable.