Hygienic stainless steel quick-fit pneumatic ball valve introduction

The sanitary stainless steel quick-fit pneumatic ball valve consists of a valve and a pneumatic actuator that uses compressed air pressure to rotate the actuator at a 90-degree angle, which drives the rotating valve body to open and close the valve. It is an ideal accessory product for chemical, medical, food, canning, pharmaceutical, gas pipeline, water supply, and other project construction. The food grade ball valve is imported from Taiwan, the valve can be divided into full flow and reduced flow. The whole series adopts 316 or 316L all-inclusive ball valve. The connection method is welded and quick-loaded. The advantages of the ball valve are as follows: 1. The pressure drop is small and the fluid passes straight through 2 Fast switch 90, low maintenance cost and good sealing.
Hygienic pneumatic ball valves are subjected to sophisticated inspection procedures and strict quality management. The flow path is precision polished and sterilized during processing. The sealing ring is fully enclosed and tightly wrapped around the ball, with no space or dead ends. The two ends are clamped for easy disassembly, cleaning and maintenance. The working principle is also to rotate the ball by the rotation of the pneumatic actuator to achieve the circulation and blockage of the medium.
■The pore size is the same as the pipe, no sediment is produced.
■ 240Grit polishing on the inner wall of the flow channel to ensure smooth flow path
■All-inclusive PTFE seal has no dead angle and is easy to clean
Sanitary stainless steel quick-fit pneumatic ball valve parameters
Pneumatic actuator double acting, single acting
Drive air source 5-7bar compressed air
Pneumatic accessories with limit switch, positioner, solenoid valve, filter pressure reducing valve, handwheel mechanism
Nominal diameter Φ 20-Φ 100
Nominal pressure PN1.6
Applicable temperature PTFE: -30~+180°C
Connection method
Body structure three-piece
Body material 304, 316, 316L
Valve plate material 304, 316, 316L
Seat lining PTFE
Applicable medium For food, medicine and other health level conditions