Industry new

Several types of connecting square fast joint

Several types of connecting square fast joint

Several connection modes of stainless steel ball valve

1. The nozzle of stainless steel pipe and mold is open

The ball automatically rolls outward, and the 1 does not connect - when the copper coat of the mother is pushed to the other end. As a result, the male head is removed, and because the male and female heads have no valves, the fluid flows outwards.

The stainless steel quick connector copper sleeve is pushed to the previous position by the force of its spring, locking the ball, and the 2 connection when the male head is inserted into the female head. Fluid flow, in which the O ring prevents fluid from flowing out.

Fast joint closed type 3 mold water nozzle open type.

Two. Quick joint and mold water nozzle are closed type:

The thimble of the male head and the head of the stainless steel pipe works is closed separately. When the 1 stainless steel is connected without connection, the female head and the male head hold the pipe passage under the action of their respective thimble and spring. The fluid flow was blocked in a flash.

The stainless steel thimble thimble returns to its original position under the action of the spring, when the 2 connection is - when the male head is inserted into the female head. The ball lock is tightly connected, and the thimble of the female head and the male head push each other to open. The flow of the fluid and the O ring can completely block the leakage of the fluid.

PREVIOUS：Application field fast jointNEXT：Method of using quick joint for introduction