Industry new

Brief introduction of cooling water and warm oil for quick joint

Do not exceed the maximum tightening torque in the stainless steel knot device, the 8 thread class device. Prevent damage. Herd fluid equipment Co., Ltd.

Stainless steel pipe fittings are joints that connect or disconnect pipelines without tools. Fast joint can be divided into quick joint of air, fast joint for oxygen fuel gas, rapid joint of gas liquid, fast joint for oil pressure, quick joint for inert gas, quick joint for cooling water temperature oil, fast joint of semiconductor.
It
The stainless steel quick connector is used to strengthen the rust prevention function. The fast connector for cooling water and warm oil is mainly used in the general mold interface. The simplification of die interchangeability is fully realized. The variety is different. Caution: do not apply to fluids other than fluids. Do not exceed the maximum use pressure limit when using. 1 do not assemble fast joint.

2 do not artificially strike, bend, stretch, prevent damage. Stainless steel ball valve prevents leakage or shedding. 3 do not use a hose with cracks.

4 if the machine is used for vibration and impact, the durability will be reduced. Prevent the sealing material from wearing or leaking. 5 do not use it outside the range of temperature.

6 the use of fluid must be a clean fluid filtered by a filter. Prevent the cause of bad work or leakage. 7 do not mix with metal powder or sand and dust.

PREVIOUS：Attention should be paid to the use of die foNEXT：Introduction of all types of stainless steel