How to do the magnetic flap level gauge is too long

For more than a certain length, it is necessary to increase the intermediate reinforcement flange or ear climbing for fixed support to increase the strength and overcome its own weight; the installation position of the magnetic flap level gauge should avoid or away from the inlet and outlet of the material medium to avoid materials. The rapid change of the local area of the fluid affects the accuracy of the liquid level measurement; when equipped with the remote transmission supporting instrument, the following items should be implemented: the zero position of the remote transmission supporting instrument should be on the same horizontal line as the zero position indication of the liquid level gauge; The connection between the remote transmission supporting instrument and the display instrument or the industrial computer is preferably laid by a protective pipe alone or with a shielded two-core cable; the remote supporting instrument should be closely attached to the main pipe of the liquid level gauge and fixed with a stainless steel hoop ( The iron surface is forbidden; the sensing surface on the remote transmission supporting instrument should face and close to the main conduit; after the wiring box inlet hole is laid, the sealing is required to be good, so as to avoid the intrusion of rainwater and moisture, so that the remote transmission supporting instrument can not work normally, the junction box It should be covered in time after the inspection or commissioning is completed.