Application description of high frequency radar level gauge

At present, the high-frequency radar level gauge has gradually replaced the market, because it has a large advantage in both accuracy and use environment compared with low-frequency pulse radar level gauge. The application of the bit meter is described in detail.
       As we all know, the working conditions in the metallurgical industry are quite complicated, and the requirements for level measurement are different in each process: simultaneously measuring the properties of the medium, measuring the temperature, pressure, explosion-proof, protection level of the medium, and measuring whether the environment has dust, steam and foam. The geometry of the tank, tank, silo, and silo, as well as the location of the installation, will place different requirements on the instrument used. Therefore, before the instrument is selected, the working environment must be carefully and thoroughly understood and analyzed. If necessary, the site should be used for on-site exploration to ensure the best use.
       In selecting the radar level timing, first consider the difference between the antenna material and the frequency. When using, try to use 26GHz high frequency radar level gauge. The 26GHz HF radar level gauge has many types of antennas, each with its own characteristics: the antenna of the GDRD-55 high-frequency radar level gauge is a pertetrafluoroethylene (PTFE) sealed antenna, which is suitable for working conditions (short range, liquid) Surface stable) liquid, corrosive liquid. A small amount of volatiles causes only slight contamination of the antenna. The GDRD-55 high-frequency radar level gauge, which is generally used in water treatment workshops, is installed in the intermediate water tank of the circulating water process. Because there are more foams in the water tank, most of them are installed outdoors in the open air.