Welcome: KUNAG Fluid Control System (Shanghai) Co., Ltd.
Language: Chinese ∷  English
Search

Industry new

Six tips for maintaining and maintaining high temperature electromagnetic stainless steel

High-temperature electromagnetic stainless steel needs to be well maintained and maintained. For specific aspects of the problem, you can find the cause of the failure of a certain part of the problem and eventually solve it. How to maintain high temperature electromagnetic stainless steel? The following six points are summarized for reference:
    First, when working, pay attention to the pressure gauge before and after the valve, the working pressure must not exceed the rated pressure, the working pressure must be within the range of the rated pressure difference. When the working pressure exceeds the rated pressure or the working pressure difference exceeds the rated pressure difference, the electromagnetic stainless steel shall be stopped, and the manual valve shall be closed before and after, so as to prevent the electromagnetic stainless steel from exploding and leaking.
    Second, after the installation of electromagnetic stainless steel need to pass into the media test several times, confirm the normal can be put into formal use.
    Third, should regularly clean the inside and outside of the big valve and the suction surface of the suction, pay attention not to damage the sealing surface.
    Fourth, the electromagnetic stainless steel removed from the pipeline when not in use, the internal and parts should be wiped and blown with compressed air storage.
    5. When the electromagnetic stainless steel is not used for a long time, the manual valve before the valve should be closed. When it is re-enabled, the steam and electromagnetic stainless steel should be cleaned out of the condensate and tested several times. After the switch is normal, it can be put into use. When using for a long time, if the seal between the piston and the valve seat is not good, the piston sealing surface can be re-polished and then ground with the valve seat.
Sixth, it is recommended that the unit be used to send someone responsible for maintenance.

CONTACT US

Contact: peng gong

Phone: 18918462396

Tel: 021-59718851

Email: kunage@126.com

Add: Lane 819, Qinghewan Road, Qingpu Industrial Park, Qingpu District, Shanghai

Scan the qr codeClose
the qr code