Stainless steel body stop valve - compact, multiple connections

Type 2012
The stainless steel body is suitable for a wide range of media, especially steam. At present, such valves have been widely used in the textile industry, the food industry (packaging machinery), equipment engineering and environmental engineering. These valves are rated for PN 25 and are available in a variety of connections.

Pneumatic actuator
Size: C Ø 40 mm
D Ø 50 mm
E Ø 63 mm
F Ø 80 mm
G Ø 100 mm
H Ø 125 mm
K*Ø 175 mm
L*Ø 225 mm
(*Material only for PA)
Material: PA (polyamide)
PPS (polyphenylene sulfide)
Control function: spring action normally closed type (A)
Spring action normally open type (B)
Double acting (I)

valve
Material:
316L cast stainless steel
Connector target='_blank'>Connector:
Flange to DIN EN 1092-1ANSI B16.5, JIS B2238DN10 - DN100 (3/8 - 4")
Welds in accordance with ISO 4200, DIN 11850, Series 2, BS4825, ASME BPE DN 10 - DN 100 (3/8 - 4")
Threaded interfaces G, NPT and Rc DN 10 - DN 65 (3/8 - 2 1/2")
Rated pressure: PN 25

Working conditions
(depending on the application)
Medium temperature: -10 ° C to 180 ° C
Ambient temperature: PA Actuator: -10 ° C to 60 ° C (actuator size: F Ø 80 mm to H Ø125 mm) PA Actuator: -10 ° C to 50 ° C (actuator size: K Ø 175 mm u. L Ø 225 mm) PPS actuator: 5 ° C to 90 ° C
Medium pressure: up to 16 bar